jim101092

So that's pretty much a 'yes' then... One step closer lol

Hi all, I've got my mind made that, as soon as i can afford it, i'm going to get one of these systems... Got a question though - Can a brushed motor be run off the CC MM speed controller? If so, would the Titan 775 run off it? Jim.

I used an old Byron fuel bottle seal to cover up the hole on my E-Revo.

You should be able to use the stock mounting plate providing you dremmel it a bit to allow enough spacing between the holes to mount the motor. It's the same kind of spacing found on a 775 motor, and people have successfully fitted a Titan 775 to their E-Maxx's.

I think RC8B wheel nuts will fit/

I will! lol - Took it out earlier...it ran away!? :S Was on spektrum so should've kicked in. Faulty ESC i'm thinking. Anyway, tbh Simon, i think the 80A will be just fine in your 3906 - It's a bit smaller than the 3905 hence a bit lighter, and on LiPO power, i don't think it'll struggle much (if at all). Still, it's prone to getting hot and underperforming, so i'll quote Guns for you: "Buy expensive, buy once".

If i gave you some dimensions could you confirm for me? After seeing what LiPO power has done to my brushed revo, i can't wait to try LiPO power on brushless, so i'm after one

I reckon the RC companies are playing the weather lately - I've had a tiny diddy little package on order for about a week and a half now (well, before the snow) and it's still not shown up. The main roads are fine and all you need is a little postie to come walk down your road and hey presto, your package is there. Might just be in customs, Guns, 'held up' by this weather (a slight cheeky laugh there as i know you've sold your EVX2, so no playing in the snow for you! )

Simon you seem eager . It's only a tenner. Wannie, do you reckon these will fit in an M18T?

TBH I'm not really in any hurry to get it back up and running - This snow is coming to an end, so i won't be missing much not having it running. I've got some mini's to pi$$ about with anyway!

I don't think it's the button - It always returns. And no, bought it second hand. If it's given up, that's that lol - I need brushless!

Yep, done the trims a while ago - they were set at zero. I've tried my 4600 NiMH's and my 4000 LiPO's....Still the same thing.

It's instant red as soon as i turn it on.

Right - From off, i held the button down for at least 20 seconds, but it was still a solid red light that didn't blink at all.

Thanks Kev that was quite helpful - Again, will see if it works in a few minutes. I just remembered though, i think i left the ESC on over night as this morning i heard my servos buzzing....Would this be of any concern?

Right - Tried that calibration process; The red LED lights up, but it doesn't blink (should blink to indicate the appliance of full throttle, break etc)...Reckon it's just gone a bit kaputt?

Cheers mate, i'll take a look now

I wouldn't have asked if i had mine - I've misplaced it haha...When i hold the button, a continuous red light shines....

Ricky, i've got full reverse lol, just no forward. And i have tried that - Well, just to be clear, could one of you enlighten me how to reprogramme it?

Hi all, Was going to use my E-Revo in the freshly fallen snow today, but i was somewhat stopped by the fact that, uh, the ESC doesn't turn the motor two ways - I get reverse, but no forward motion at all. What is the problem? Jim.

Will do Kev - I'll keep you informed.

Nah i think i'll just save my slowly accumulating pennies and get a Castle System - Best system or not, it has a warranty and that's good enough for me!

Do let me know what the total comes to for your MMM (like, including shipping, customs, VAT etc)

LOL - I get the feeling that RC doesn't like your wallet

That is pretty good! - Probably not the most favourable when it comes to running them in series when you get a brushless system...Won't have the best run time I'm just charging another pack as we speak Fantastic batteries at 40 quid each.