Jayce

I made a rollcage(purely show not functional) and have added the drivers seat and made another steering wheel. It still needs tidying a bit and the front cross brace adding at the top of the windscreen,before getting a dusting of flat black. Questions and comments/suggestions welcome.

These are great trucks,i had one until recently.They are very capable out the box. Those green things are gate markers,1 whole pair for one gate! lol

No sorry it's fs only.

That is the lowest price basically it's

Open to offers on the Cyclone

Thanks,i hope so This is the first time i have clicked with it myself,always ended horribly before.If the chassis parts were all here,i dont think i'd have done this much interior work. I'm not sure if smileys will suit it,as it isnt staying blue. i need to get some more clear red,then i'm gonna be giving it a custom paintscheme too. Thanks for all the comments. They help to keep me going.

Contact me via [email protected]. Next is an Mtroniks RV20 auto esc,was fitted and used once,has had bullet conns removed,still has tamiya batt connector. £15 posted Reedy MVP motor £8 posted HPI SF-2 Hi Torque Servo £8 posted Acoms Techniplus TX ONLY Brand new,used once. £15 posted I will combine postage on multiple items. Payment via Paypal(gift) or cheque/PO

I did pick up a couple of pieces of tube from the lhs,but even the smallest i bought is too big for a roll cage. But remember the faux shocks from a few posts back? I did two types to see which look best. Started sticking some styrene together and came up with this. Yup,it's the start of the interior for this truck,i'll be adding the full cage next. I did some more interior work tonight,i did make a steering wheel too,but i busted it while shaping it. I have the cab front firewall cut now,but not fitted yet and the steering column in and dials made. Comments/suggestions welcomed.

Thanks for the positive comments guys as soon as the gearbox parts arrive i'm waiting for,there should be significant progress.

I recently got this truck body in with a deal,and was going to make a mudder truck with an evo truck chassis. But after this mockup,my mind was made up! The body came without a grill or tailgate,so i decided to have a go at making them.I made a start on the grill,it still needs some tidying,before i build it up to form the grill and light surrounds. It fits pretty well too. i finished the surround on the grill. I will put the centre piece and the emblem on tomorrow. added the centre part and the emblem to the grill.I will fill some small gaps tonight then sand and shape some more. i have made the bumpers too,needs filling and more sanding but the basic shape is there. The bumpers were a little too large for the truck,so i reduced them a bit. still think the front needs to lose another mm.The more re-filling, re-shaping and re-sanding :duh: The front bumper was about 1.5mm taller than the rear one,tho not any more And that's pretty much where i am atm,i'm waiting for another truck front end to arrive to complete this. It will be using a micro esc,and hobby servo's for steering too. Small update,i have the wheels converted now I took the wheel centres on the monster wheels out to 6.5mm too,i can now fit the atomic socket in there. And have two front ends with lift kits fitted,tho i need the bushings that fit the red gear,and two of the g box casings that are missing here. It's also a good job i received another chassis with the front end,as it appears i'm too dumb to use a measure properly and cut the original chassis' too short . All fixed now tho,and another mockup, just chassis this time.

Still looking! anyone selling?

As title looking for a DX6/DX6i with rec,paypal waiting for the right one. Please contact me via [email protected] as i dont get on the forums much.

Jason Milton keynes [email protected] I am selling my helios,boxed with 27mhz AM module and black KO aerial.