Jump to content

badenemy

Members
  • Posts

    38
  • Joined

  • Last visited

Profile Information

  • How did you find this forum?
    internet

badenemy's Achievements

Newbie

Newbie (1/14)

2

Reputation

  1. hi to all i have been looking over all the settings in my hpi firestorm flux it has a cut off point when my lipo battery is depleted to a certain point i can change this but not sure what to set it at my battery im using is gens ace 5000 50c 2s any advive would be greatfull.
  2. i mean attaching battery to charger and just reading what charge is in the battery lipo 2s that is
  3. is there anyway to just read what the battery charge is looked over the manual 4 times now its the 4 button overlander charger below.
  4. i read the manual but could not find it but im sure it must do the charger is an Overlander RC6-VSP 80watt 7A Output AC/DC Charger
  5. ok so charge at 5.0 and 7.4v 2s and store at the exact same ?
  6. thank you just one other thing if you have, an overlander 4 button charger is there a setting to tell me what the battery is currently at.
  7. hi to all i have got 4 gens ace 5000mah 50c 2s lipos and an overlander 4 button charger im wanting to know when i charge it on a balanced charge what amp should i use 5.0 is what i think it is but it could be 0.5 just want to make sure also would like to know what amp to use when using store mode thank you for your help.
  8. the hpi e firestorm has a tamiya female connector i take it you mean cut it off and put on a female deans
  9. thank you very much for your help and have a merry xmas and a happy new year.
  10. I've seen what i think i need on ebay but not sure off the exact size required
  11. yes my charger has deans connector can i not buy an adaptor as i want my son to use the NIMH battery also to start with to get used to the car
  12. hi guys and girls need some advice just bought hip e firestorm and it came with a NIMH plasma battery but after asking on the forum i was told to get some lipo batteries problem i have is lipos i have come with deans connector so how do i connect deans connector to the connector on HPI firestorm this is the battery i have in the link below that connects to the car. http://www.ebay.co.uk/itm/like/310857408399?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0
×
×
  • Create New...