samshirley001

daily bump

how long are german long arms?

what motors and props are you using?

not a lot to say, would be ideal for a drifter, entry level off road could solder deans connector to the ESC if you want, comes pre-soldered with 4mm bullets. http://www.hobbywing.com/product_show.asp?id=253 - about ESC motor is sensorless 2500kv, not a lot of info about these on the net, but used to race with it, nice and quick. asking price -

been getting a fair bit of vibration from the quad, despite my props being 99% perfectly balanced. saw this article online, and decided to follow it http://aeroquad.com/showthread.php?6050-Balancing-Motors-With-Zip-Ties

another bump

another bump

try the sorex 32 JB's, ive had a pair and they last for ages, on my 10th meeting with them and they atill have plenty of life left. the ride 30's are another choise but they have inconsistent grip

look on the previous page, its a minim OSD

ive been flying for a good 12 months now tam, that crash was just a mis calculated flight. ive had plastic props shear mid flight too, carbons feel a lot different when flying. might end up getting some new motors in a few weeks, not sure what ones, but would prefer ones that dont make my batteries and props obselete. OSD working now, although not the easiest thing to see with the pic.

not the cleverest thing i done cracked a prop, but other than that no major damage.

another bump

i did take it up, and used less, some wires were poking out and it wasnt sitting flat. was gonna go down mendip rc for some footage, but my lift had "technical issues with his car"

looks a lot like the turnigy 9x

they are pin style, but you can get adapters quite cheap.

i personally dont have the parts to make it a rtr, but modeslport sell them, all it needs is electronics, 48 pitch pinion, rear wheels and tires, but i might be able to throw in an old shell if you want.

bump, no lower price tho

bump,

http://www.hobbyking.co.uk/hobbyking/store/__45912__Micro_Paraboard_Micro_JST_JST_PH_Connectors_UK_Warehouse_.html i pulled off the white connectors, put some red paint on the positive side so i know what side is what, and plug them in. with that you can charge many packs at once, for this, add the capacity up for all the packs, say you got 4x 250mah packs, charge at 1000mah

bump, will take

so i finally got this thing flying a few days ago super stable, although might need new motors, as the ones i have are giving a lot of vibration. probably gonna get 35xx 850kv hobbyking jobbies when i get paid next. hover test went fantasitc, got plenty of flight time from 3700mah 3s packs. also tested the RTL, what while not being 100% accurate, was fairly close. where it took off the vid

as title says, my radshape SC10 roller for sale. was used for racing, needs a little work but can be made back to its origonal state no rear wheels as they had stripped pins on them, so it seems unfair to sell with broken parts. comes with a radshape ally conversion for the chassis - https://www.radshaperc.com/blog-article/associated-sc10-chassis comes with full RPM arms all around too, just to make it a lot stronger. everything else is sound, gear diff recently replaced and brand new 84t spur gear fitted. can be made into a basher very easily, just throw in some electronics, some rear wheels, a shell and off you go. if you want additional pictures, just comment or PM me as price states,

i took out 2100-ish running 5 mins 13.5t at cotswold, 13.5 boosted geared for neary 7, loads of boost and timing.