[bubbles in my fuel line]

one or two is somewhat normal, but a large number normally means youve an air leak, that will also indicate why your blowing plugs, as the engine is running more lean because of the added air in the mixture

[Hyper 7 alternative?]

caster zx1.5

[n00b question]

never heard of that before..

low speed is about pick up off the line, so you can only do that by trial and error, you'll know if you get it wrong, as it will hesitate or bog

[Losi 8ight quick change engine mount bolts?]

get some decent stainless ones off of ebay that match the length

[Help needed]

either a massive airleak, or youve a false idle.. squeeze the carb shut and see if it still does it

[iPad issues when on forum]

if you cant put paragraphs then its probably in HTML so you'll need to use code like < br > blah blah < br/ > (without spaces) which will create line breaks.

Posted from my BlackBerry PlayBook

[What are you waiting to be delivered?]

my super duper bargain pc for work

[Help needed]

recreate it on a brick, is it the servo thats slow returning, or is it at neutral?

[Where do you get your nuts, bolts and fixings from?]

i just type what i want into ebay. like "m3 hex countersunk"

[truggy parts]

at idle the engine should keep a consistent RPM if the engine is meshed or not. if your driving and the engine shifts, then it will over rev if your still accelerating as theres no resistance.

as for engine bolts they are just m3 cap heads and about 12-15mm long. dont get rc specific ones as you'll pay like

[Trophy Truggy Brakes]

you ideally need a fast and torquey servo. allowing the brakes once set correctly to bite fast and strong. also have a look at fitting answer rc brake springs. they sit on the rods between the 2 pads putting constant pressure against the pads keeping them open, so the brakes dont drag, and stops them glazing

[Silverstone Moto arena]

I stand corrected on the price, that was just down the racers grape vine

[how do i remove a piston/sleeve]

heat the engine up, stick a cable tie in the exhaust port, and then turn the flywheel. the sleeve then just lifts out

[Silverstone Moto arena]

most clubs charge

[New Tamiya Avante Truck!]

anyone want to play with my vaj?

[New Ansmann Racing tools]

not as nice as there last ones

[Post your desktops!]

i created that picture when bored

[Cooling head damage]

I snapped off all bar 3 fins the first time I used my go engine.. well it was also the last

[how do i make my car idle]

could also be too rich on the bottom.

having said that not all engine idle till the tank is empty. my Rb is only good for about 10 seconds before it needs a blip of throttle or it will die

[I accidentally bought it...]

lol forget my pm reply then great engine though!

[How to set (EPA)]

I look how far the servo has to travel to do its job, then set the EPA at that point, then back it off 5%. some servos are always buzzing or make noise, savox's for one.

[Half decent game pc]

ive heard people have installed mac OSX on an AMD rig, and the hackintosh guys are apparently working on it. weather it comes to anything I doubt it.

[to the tidy ones out there, what do you use to keep spare parts etc in?]

venom hauler bag

[Engine won't run]

its not a blocked jet lol I proved that by asking if fuel was spitting alot from the exhaust lol

[Reshaping Lexan Shells?]

you can if you heat it up enough, but its trying to concentrate that heat in a specific spot and trying not to burn it.