quakebo

well I tried my mates battery's and have the same problem so I guess I need a new charger

I know Losi Mini Duplex Tyres fit Mini-Torquer Chrome Wheels so will those wheels fit my rc18t or is there an adapter I need to make them fit?

ok thank you

well when they used to fully charge the 1100 would last for 20min and the 1600 would last for 30min on full power (i have a brushless system). I will have to borrow some of my mate's 1/10th scale battery's and try them.

I have tried charging them again and they do not get to 300 before the charger says they are done. so I put them on my meter and it says they are 8. something volts so the battery's seem fine so it could be the charger then. because they use to charge fine but now they do not. I do not use them much. are these good charges and if so which is better for nimh battery's? BMI Digi Peak 14 5A Charger Core RC UDC-20 Universal Digital Charger and Balancer

will mini t tires fit on my rc18t wheels?

all I can change on my charger is the type and size of battery as nimh 1600 and I can alter the charge amp rate. so what would be the best charge amp for my 1600 inmh and 1100nimh battery's

well none of my nimh battery packs will fully charge on it so I though I need a better charger/discharger. also how do I know if my battery's false peaking

whats the best nimh charger/discharger for under a £100. I have a ansmann xmove deluxe at the moment which is not very good because it will not fully charge my batteries but it was cheep so I want something better. the batteries 1 pack 1100nimh and 2 packs of 1600nimh for my rc18t.

I have a rc18t which has a trinity blue alliminuim chassis and I have silver alliminuim gearbox's the problem is that when I turn the wheels to the right they catch on the gearbox so what should I do? when it is on the ground the wheel do not turn much. (I have tried with the standard servo and the hitec hs-65mg servo and get the same problem) I have a Steering Drag Link and two Metal Servo Saver Rings Springs coming will this help? one more thing what bumper would fit best I have a integy one on at the moment but that does not fit right because the gpm alliminuim arms move forward and back.

it's ok i found what i was looking for

it is the spring that goes on the end of the dogbone. part nunber is 21030

can anyone tell me where to get a new swing shaft spring for my rc18t as i have lost one. I can not seem to find them on the net anywhere. any help would be great

ok thank you

where is the cheapest place to buy a SIDEWINDER MICRO 8000KV

I have 2 reedy 1600 7.2v nimh micro batterie packs which i would like to add two more cell's to each one to make them 9.6v. anyone know where I can get the cell's from?

where on the net in the uk can i get mip stuff and the toyz steel gears? if you can not tell me here. pm me

I have a standard rc18t except for the Sidewndr Micro Sprt + 4200 kV Cmb and was thinking of adding these bits to replace the standard parts is this good. and is there anything eles i should do. 1 x RC18T ASSOCIATED RC18T/MT/B/R TITANIUM DIFF OUTDRIVE 2 x RC18T Blue Alloy Universal Drive Shaft 2 INTEGY (CVD DESIGN) 1 x RC18T GPM STEEL DIFF GEAR SET 2PC (i want to replace the whole diff with good quality parts front and back i was thinking metal diff gears) also is a aluminium chassis any good?

I have a Associated 1600 Series 7.2V Flat Micro Pack NiMH,Castle Creations 1/18 Sidewndr Micro Sprt + 4200 kV Cmb the problem is now my rc18t is running slow it used to run nice and fast for 30 min and the motor would get well hot . so do you think the motor has had it.

Associated 1600 Series 7.2V Flat Micro Pack NiMH,Castle Creations 1/18 Sidewndr Micro Sprt + 4200 kV Cmb, and 14/60 gear combo with setup it runs for 30min flatout.

my 2 Associated 1600 Series 7.2V Flat Micro Pack NiMH ghave not come yet but my 1100 nimh bat that came with it last's for 20min

I have got 2 Associated 1600 Series 7.2V Flat Micro Pack NiMH coming from tower hobbies at the moment should be here by the end of the week so that should make it run longer. I will try them and post here how long my rc18t truggy runs for.

with this setup Associated 1100 Series 7.2V Flat Micro Pack NiMH,Castle Creations 1/18 Sidewndr Micro Sprt + 4200 kV Cmb the car runs for 20min flat out. so if I turn down the timing on the esc via my pc will that make it run longer?

this what I am going for Associated 1600 Series 7.2V Flat Micro Pack NiMH,Castle Creations 1/18 Sidewndr Micro Sprt + 4200 kV Cmb, and 14/60 gear combo so this should make it run a long time. I decided not to go for lipos

I was going to get one of these Hyperion CL2100 16C-22C Packs - 2100mAh, 33.6A Continuous - No Connector as someone on another message board told me it would be allright. and a NOVAK Smart Stop - 2 cell LIPO safety cut off module