RestInPieces

Stainless would be fine, just dont do any big air! Sent from my iPhone using Tapatalk

It turned out pretty good actually, did miss a few spots where it was hard to reach but overall I'm impressed considering it was my first time Sent from my iPhone using Tapatalk

New shell for the truggy all painted! Sent from my iPhone using Tapatalk

Adding a switch into my xbox supply, there is a little fan inside to keep it all cool! Sent from my iPhone using Tapatalk

I grease bearings, is that ok? Wd40 all the steel parts Sent from my iPhone using Tapatalk

You dont need to clean it every time! Just keep the bearings in order and keep up the wd40 Sent from my iPhone using Tapatalk

Yeah and its easy to do! You can get them for a few quid. Mine was only £5 Sent from my iPhone using Tapatalk

Didnt need it so i thought i would use it! 12v at 16amps. Plenty off juice Sent from my iPhone using Tapatalk

Xbox power supply powering my charger [emoji23] Sent from my iPhone using Tapatalk

Is it normal for a 6v hump pack reading over 7v on my charger?? Sent from my iPhone using Tapatalk

Bolt on jobbies. Front + rear 4mm inner proper job 109848 (uses 3mm nut) Rear outer 3mm proper job: 68184 or Hobao 3x50 H90028 (uses 3mm nut) Front outer nothing with good availability. For nut and bolt mod minimum lengths required, longer can always be cut with dremmel. Front + rear 4mm inner: M4 x 78mm + M4 nut Rear outer: M3 x 50mm + M3 nut Front outer: M3 x 40mm + M3 nut Just ordered some bolts for this Sent from my iPhone using Tapatalk

I would say its common to have some slop Sent from my iPhone using Tapatalk

Do you reckon this thing will fly? [emoji23][emoji23] Sent from my iPhone using Tapatalk

These seem to be working really well now with 50wt oil Sent from my iPhone using Tapatalk

Or you can avoid all his and go nitro Sent from my iPhone using Tapatalk

Yeahh hpi big bore springs just about fit on the shock body. But not on the retainers Sent from my iPhone using Tapatalk

Thats strange, many people have said they do.

The springs are alright, apparently hong nor 16mm springs work so will try to get some stiffer ones Sent from my iPhone using Tapatalk

Whttp://uploads.tapatalk-cdn.com/20160116/3567a6e9450e7ad8acfdd4174ec5332b.jpg[/img What do you guys think? They seem good so far. But will have to test them out. Also a tad harder springs Sent from my iPhone using Tapatalk

Depending on flux or nitro as air filter and clutch doesn't apply to one lol but both require the rest 17 mm conversion anywhere from £35 upward shocks upward of £35 depending on what you go with front alloy hub £20 clutch £20 ? air filter £10 diff gears £21 rear hubs £20 chassis brace £10 upward time you ad nuts bolts etc servo nitro £20 to £50 X 2 or £20 - £50 for the flux bearings for the slop £3 esc for the flux but not essential £60 there are other bits like a tuned pipe maybe better tyres, alloy diff cases maybe alloy bell crank and so on but these are more personal than the others I feel .. Hmm that's a shed load more than the £150 I thought let's knock off some bits but which ones are not really needed at some point ? Or you do what i did and buy roller truggies with uprgrade bits, swap them out and sell then on again for the same price! [emoji23] Sent from my iPhone using Tapatalk

I use this not convinced there any good to be honest I had better results with my old pulse shocks Oh really? Must be better than stock tho with the right springs Sent from my iPhone using Tapatalk

Reckon mines up for some big air now! Sent from my iPhone using Tapatalk

Im running 50 atm Sent from my iPhone using Tapatalk

From which car may I ask? Hopefully the results are positive. I'll have to look into it but maybe the shocks from a Losi LST could work. Hobao Hyper mt [emoji28] Sent from my iPhone using Tapatalk

Ordered some 125mm long 17mm big bores [emoji2] see if they work any better! Sent from my iPhone using Tapatalk