chrisp
-
Posts
73 -
Joined
-
Last visited
Content Type
Profiles
Forums
Prizes
MSUK-Forum - RC Model News and Community
Articles
Events
Posts posted by chrisp
-
-
On 2/14/2016 at 17:25, Sillypig said:
Hello everyone, used to be into rc a few years ago, now thanks to eBay l just bought myself a Hpi maverick blackout st truck!! It's only been used for 3 tanks of fuel by the guy l bought it off & he started it when I collected it.
Went to use it for the first time yesterday, and put choke on, pulled the pull stater 3 times, choke off & it wouldn't start. tried for about 20 mins and nothing.
sorry to ask on my first post, but is there someone local to me that would be willing to help me please & get it going?? Willing to pay of course.
got a lot of spares for maverick st and mt...
got a full set of unused st wheel rims...no tyres or bead locks but still new....never know when wheels needed..
-
i got killer bee switch..
great kit with led,buzzer low voltage and radio glitch cut off..also a port on there for a temp sensor so if too hot will cut it off too...
BUT when it shuts of the engine it still allows you to control the car~(brake and steer)
this can also kill the engine using your third channel switch in your remote.....
£56 off flea bay
-
i got killer bee switch..
great kit with led,buzzer low voltage and radio glitch cut off..also a port on there for a temp sensor so if too hot will cut it off too...
BUT when it shuts of the engine it still allows you to control the car~(brake and steer)
this can also kill the engine using your third channel switch in your remote.....
£56 off flea bay
-
i got killer bee switch..
great kit with led,buzzer low voltage and radio glitch cut off..also a port on there for a temp sensor so if too hot will cut it off too...
BUT when it shuts of the engine it still allows you to control the car~(brake and steer)
this can also kill the engine using your third channel switch in your remote.....
£56 off flea bay
-
i got killer bee switch..
great kit with led,buzzer low voltage and radio glitch cut off..also a port on there for a temp sensor so if too hot will cut it off too...
BUT when it shuts of the engine it still allows you to control the car~(brake and steer)
this can also kill the engine using your third channel switch in your remote.....
£56 off flea bay
-
i got killer bee switch..
great kit with led,buzzer low voltage and radio glitch cut off..also a port on there for a temp sensor so if too hot will cut it off too...
BUT when it shuts of the engine it still allows you to control the car~(brake and steer)
this can also kill the engine using your third channel switch in your remote.....
£56 off flea bay
-
cheers.....
ping !!!!!!!!!!!!
ordered.......
-
Got one of these in my nitro tool kit, had it for 18 months, great bit of kit for out in the field!
where can i get one
-
http://pages.ebay.com/link/?nav=item.view&id=141145711420&alt=web i got for my savvy flux. ...
ya can get those wheels off ebay with tyres already fitted.
price aint to bad either.
-
Which brand you using? What weight / CST
dont know what wt it was as it was the original oil which came with the truggy when new(about 8 months ago))
now i have put 60wt in them....hpi brand.....
is that any good?????????????
-
took truggy out yesterday in this heat(36 degrees).after a while started to handle like crap...
got home to look but couldnt figure out a first what it was.
stripped down shocks and found shock oil like water.
could it have been the heat that affected this??????
has any one else had this?????????
changed oil now all ok...just like new...
-
well guys beautiful weather for bashing.
been out on a track for 3 hours,car got ditched...
got home and spent three hours cleaning and looks like new..
also whilst stripped down replace all m3 nuts with orange aluminium ones also fitted a exhaust gas cooler...LOOKS MINT...
P.S THIS IS NOT A SHELF QUEEN....LOL
-
1
-
-
got mine second hand gave them a good clean new shock oil and away we go...
-
https://www.youtube.com/watch?v=u36qNWYuSVc
took mta4 and 3.5 hpi trophy out jumping today......
got to say not much good at jumping need more practice me thinks..
will get better i think before i jump my trophy 4.6 pride and joy...
-
Guys what's an ok upgrade for a steering servo on my trophy truggy, think the servo is on its way out was playing up the other day and read there not brilliant so didn't want it to give up whilst I'm out bashing.
It's a standard truggy my budget is around
-
Guys what's an ok upgrade for a steering servo on my trophy truggy, think the servo is on its way out was playing up the other day and read there not brilliant so didn't want it to give up whilst I'm out bashing.
It's a standard truggy my budget is around
-
remove air filter.apply brake then look in side carb...gap should be about 1mm..with brake still aplied adjust idle screw till gap correct......release brake.refit filter start and test should be fine now.....
mine had same problem...did this and all good
-
remove air filter.apply brake then look in side carb...gap should be about 1mm..with brake still aplied adjust idle screw till gap correct......release brake.refit filter start and test should be fine now.....
copied from elsewhere ....anyone help...
"Anyone know why my nitro car cuts out when i press the brake?
It has had a new clutch but still does it. The car is a Thunder Tiger Sledgehammer S50"idles and runs fine he says..
-
used to visit ndor quite often and the answers to your questions are yes its a great track ,, with a good canteen ,, onsite toilets etc ,, the bloke that runs it (tim ramsden aka mallet is a top bloke and will gladly help you iron out any tuning issues etc with your car ,, i would defo reccomend ndor bud ,, ps im also from derby
cheers mate .
a few of us go down the car park on pride park(park and ride near footie ground)on a sunday if its nice.....got some grass banks and fresh laid tarmac...no body down there but the rc guys....
roughly around 6.30 and great if it gets dark cause its flood lit...
if ya cant see us you will here us
-
hi guys....
has anybody been to the ndor track in notts and if so was it any good and would you recommend it...
let me know cheers as a few of us from derby thinking of going there OR is there any where else local to derby notts area anyone could recommend...
thanks again in advance.....
-
Don't know if this is any help, but i recently bought a set of truggy wheels and tyres off the bay, seller said they came from a losi and they went straight on my gt, though i do have extended hex's on mine
Allan
http://www.ebay.co.uk/itm/281135860468?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
ive ordered these for my hpi trophy 4.6.....there gonna look mint
-
here you go....ebay.
think these are pins your after
-
Hi guys I've looked over posts about servos but they are quite old!
I'm on a buget ( baby on the way) and I need to up grade my servos for my ansmann virus 2.0 nitro, I have no clue what sort of servos I should get etc so any help is very much appreciated!
SAVOX SERVO...WELL RELIABLE QUICK AND STRONG....
-
1
-
-
Maverick Blackout upper arm option upgrade
in Monster RCs
Posted
I would stick to the plastic one..
might not look as good but if ya hit something it's only them that break and don't bend chassis