-
Posts
656 -
Joined
-
Last visited
Content Type
Profiles
Forums
Prizes
MSUK-Forum - RC Model News and Community
Articles
Events
Posts posted by Rc lari
-
-
Sold mine. Needed money [emoji22]
-
Nice!!
-
I used a hot gas soldering iron at work so I just use that just make sure it gets really hot so its a touch and go job. So not to heat the motor connectors to much
-
I've now got the ezrun 120a 4000kv setup with p/card £89 works really well
-
Just blown the stock combo in the blitz. Hoping it just needs a recalibrate but atm no movement. Fan starts up on the esc and the servo turns left and right but no forwards or backwards. Tracks a bit muddy and wet so I may have fudged it....
I had this issue with mind the stock emh3s ESC is ment to be water proof but its not very.... Best thing to do is disconnect the fan if possible remove from car and dry out on a radiator... Once dry rebuild and recalibrate.. Also make sure you dry/ get water out out the motor. I got loads in mine... To the point I blow hard into the motor output shaft end hard and managed to force water out the wires... The same the other way around. Even then the motor siezed up and I had to strip it down and try and free up the bearings it should come back to life when it's all dried out OK. Mine is in my new Sakura d4 drifter work great..
Good luck
- 1
-
Very true.. Using the Velcro can be a fuse to set up each time could always use magnets they should be easier each time and should self align
-
-
Nothing today
-
got me some awesome camber on a tt01 and lowerd it
Pictures ..... Or it didn't happen!! You know the rules lol
-
There is a smart car around my way thats covered the same
Yep my way also!!!! Hmmmm is your way the same as my way.......[emoji189]
-
Ill see what its like on carpet tonight. I'm gonna have a good go without a gyro for now lol
Good luck its a bit crazy lol...
I've put mine on Max then turned it down about half way otherwise it doesn't want to drift lol
-
Ah, that sounds about right. You want the tyres with the least traction for the surface, then you need to dial in the grip.
I reckon everyone will be switching to the rear battery holder soon.
That's how are very got my battery at the moment hanging out its arse.... Don't seem to get much front grip now... [emoji22]
-
nice work on the shell pal. mines an AWD so no need for a gyro.
like the mod for the body mounts i too hate using body posts, but also hate setting up stealth mounts. hmm the dilema
Thanks buddy
Setting up the stealth mods was really easy to be honest
-
Where did you mount the battery housing?
-
Hows the build coming along?
-
Looking good mate. Have you removed the body posts all together?
Yep gone mate. Just used Velcro on brackets Buddy not my favourite shell be for but was fun making it look like this on the evening whilst watching telly
-
I've not been able to use forum since Friday on my phone or pc has there been issues ? It's also very slow on Tapatalk
Sent from my SM-G928F using Tapatalk
Yep I think the site is having updates being carried out ???
I'm the say managed to post some thing today but as you said Tapatalk very slow
-
Sorted the rest of the shell and got my hands some wrap also..
Then the new wheels arrived and fitted a spoiler..
-
So finally able to get on the forum again. Has anyone else had any issues??
Anyway got bored with the white shell I had so got the knife out and had a play.....
Don't like the body posts sticking out so sorted that..
-
I had similar issue with my 120a ezrun setup found if throttle trim is set slightly to much forward I can select reverse...Had it for two years, sat boxed until a home came along.
Program boxes (both old and new style) work perfectly, set correctly, seemed to calibrate correctly, but when the trigger is pushed, nowt happens.
Quite odd. I shall, of course, start a thread specifically about it
Hope it helps
-
Very good answer lol
-
Okay??? What does that do?
-
-
Dumb question alert again!! What's the FDR?
Hop-ups for tamiya m-06???
in On-Road & Drifting
Posted
Hi can people help please?
I've recently bought a new lowride pumpkin kit and found the gear bearings don't fit as the originals and the new sealed ball bearings I bought just fall straight out , I even bought the reinforced gear assembly but just the same!!.... I've contacted the supplier and they just said call tamiya, a bit pants customer service really..!!
Also I'm after some hop ups and some oil filled shocks/dampers but can't find any for the M-06 just m-05 / M-03.
If anyone can help that would be grateful.
?