Jump to content

Morpet

Members
 View Profile  See their activity

  • Posts

    828

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Morpet

  1. Morpet
    Get yourself some wider wheels too that really helps like these
  2. Morpet
    You could just upgrade the shock caps for alloy ones (that's what I did) as that's the only real weak point I've got the red springs fitted as well there stiffer so less chance of rolling
  3. Morpet
    I can't believe I've just found this thread I've just finished the exact same conversion (except for diff combo and a few other bits). I've made the mistake of buying a 3.0 e shell and as you've said it don't fit!!! Gutted so glad you listed a few alternatives I was lost as to what to get. Now I know Lols I will be following this thread closely. Good job on the guide wish I'd seen it before I'd started mine though
  4. Morpet
    Pm sent
  5. Morpet
    Would you take
  6. Morpet
    Have you still got the 2nd hand 3.0?
  7. Morpet
    I've got a shell might have a tank too I'll a look tomo
  8. Morpet
    Will u take 20?
  9. Morpet
    Does anyone know where I can get a clear shell for a losi 8ight truggy 1.0. I can find loads for the 2 and 3 but nothing for mine. Cheers
  10. Morpet
    Yeah there pretty heavy those mate. Strong but heavy
  11. Morpet
    Same here I had issues with parallel changed to series much better. I remove the primer bulb as well as it was holding air. It's just as easy to pinch the exhaust.
  12. Morpet
    Looking for some wheels and tyres for my 8t 1.0. Needs to be 1/2 inch offset Any about??
  13. Morpet
    Your right sean remember the hassle I had Lols. DO NOT TOUCH THE MID NEEDLE!!!!!
  14. Morpet
    Me
  15. Morpet
    Which parts? Got some pics? Or part num
  16. Morpet
    A hair dryer does the trick
  17. Morpet
    You can change the clutch bell and the spur they are available just not easy to find
  18. Morpet
    It doesn't change the top speed as your only changing the actual shift point. To increase top speed you need to change the gearing itself.
  19. Morpet
    That caps so you can adjust gear shift point. You line up the holes and use an Allen key. Take a look in the manual it explains it in there
  20. Morpet
    You don't need power off or open throttle just block exhaust and turn engine over with out igniter. I got rid of my primer caused tuning issues I found
  21. Morpet
    Is that a crack?
  22. Morpet
    You've got yourself a elks mate is the orange oring ok
  23. Morpet
    Gatwick
  24. Morpet
    I think he's got a diff header to the one I was thinking of.
  25. Morpet
    Yep defo need a new spur mate
×
×
  • Create New...