boombox

Ive installed this new servo ( For steering ) into my TT4.6 however when turning the wheels left the servo seems to shudder eraticly but its fine when turning right it doesnt shudder, it also shudders when brakes are applied which i have no idea why, ive tried playing around with the servo end points and the same thing happens. i also noticed that when turning the wheels it interferes with my throttle servo(servo arm moves a bit) somehow and my carb opens about 1mm extra. also the servo connectors are 100% in the right slots on the radio gear. further info : ive moved the stock steering servo over to the throttle and using fresh batteries any ideas?

Before you start your engine, have your electrics on, and adjust the Throttle trim on the controller

Hopefully it all runs smoothly for you

The main difference is the nitro content and oil content. Its best to stick to the same kind of fuel or your more than likely going to have to retune, i started off with 20% for the first litre then jumped to 25% after the break in

~Dont forget to add the spacers to your suspension.. unless you want a really low ride, and also get a decent nitro starter set and decent fuel

Does this look like a decent replacement for the stock servos in TT 4.6? http://www.ebay.co.uk/itm/DS-1660-26kg-High-Torque-Throttle-Steering-RC-Servo-Metal-Gears-Digital-Coreless-/360718329407?pt=UK_ToysGames_RadioControlled_JN&hash=item53fc7ce63f

With the HPI 4.6 you need to set up the failsafe you dont need to buy anything else, instructions are in the manual. the button for the failsafe is in the battery compartment (you will need a paperclip or something) . Once its set up you car will apply the breaks if the controller glitches/looses connection.. Just make sure your batteries in your car are always topped up.. A failsafe is useless if your batteries are dying,you will loose control over both servos... a leason i learnt.

i was just wondering if it is ok to refuel my car while its still running or do i have to turn it off refuel then start the engine again?

Cheers for that, will get one right away

Hey can anyone recommend and good steering servos for my tt 4.6. my budget = around

Another nooby moment here but when i apply full throttle, i see the carb get stuck(wide open)then when i release the throttle and a few seconds later it pings back to the idle. Does anyone know why this happens?

Im on my 2nd tank of break in of my tt 4.6, is it normal for a little bit of smoke to come out the engine when i take the glow plug out after i finish a tank?

Can anyone tell me if their fuel tank in their TT 4.6 wobbles? Mine has the 2 black screws holding it there but i see another screw hole with no screw in there, its just come out the box so it couldnt of fell off. can someone check theirs please?

Can anyone tell me whats the most suitable weather/temp to break my engine in? or does it not matter? Also what do you guys recommend threadlocking & what type should i use.