Jump to content

The chosen one

Members
  • Posts

    262
  • Joined

  • Last visited

Posts posted by The chosen one

  1. Selling my RC18t factory team will almost everything single upgrade available including a carbon fiber chassis. car comes with a half complete car which was used for spares and 3 sets of tyres

    The car has a brushless system with a 3600kv xcar motor and a ez run 4800 kv motor and a turnigy 18 amp ESC. the car also comes with a savox servo.

    features:
    Brushless
    factory team shocks
    carbon fiber chassis
    aluminum hubs and hub carriers front and rear
    adjustable turnbuckles
    CVD's front and rear
    carbon fiber shock towers front and rear
    aluminum A arms front and rear
    Ball diff

    2 proline bodys (truck)
    1 Buggy body and wing
    3 sets of tyres
    2 spare servos

    Lot' of small bit's and bobs but some not shown in picture

    Car also comes with everything to do a buggy conversion

     

  2. Perhaps over-geared? Can you lower the gearing slightly, as you've fitted a hotter motor the ESC might be struggling to get it moving. The LVC sounds like it's being activated early due to the excessive load?

     

    I tried re gearing to a 19th pinon but still have the same problem. It might be the sensor board

  3. Hi, I just got an LRP 6.5 motor for my B44.1 running a speed passions reventon pro ESC. The problem is that the motor coggs a lot when you put full power on the car form a stand still but also after 15 seconds the car will start to drive very slowly. I did change the battires but still have the same problem. I never had this issue with my speed passions 7.5 motor. but it's fixed when I run no timing or punch. is there a way to fix this problem so I can run some timing and punch?

     

    Thanks

×
×
  • Create New...