j_seyfarth
-
Posts
35 -
Joined
-
Last visited
Content Type
Profiles
Forums
Prizes
MSUK-Forum - RC Model News and Community
Articles
Events
Posts posted by j_seyfarth
-
-
The newer versions of the DX3C are dsm2.
Otherwise i have a mysterious problem. I run with 5 cars with orange receivers without problems
-
1
-
-
If you don't need the telemetri i have had good experience with the DX3C models. Also with orange receivers.
Never had an issue on the tracks with range.
-
The steel spur and pinion is what makes the noise from a Vorza. Nothing else should be making noises.
It is normal with the toe on the rear. It is the same as with the race buggy D8 which shares a lot of parts with the Vorza.
-
I'm running my mad monkey with a 10,5 t brushless setup and no gears have stripped yet.
Admitted i don't runt it that much but still it has not stripped yet.
I had most of my problems with the shocks and they are now replaced.
For a 2wd 50
-
1
-
-
Re the Dx3C transmitter.
Would you send it to denmark? And what would be the price then?
I live in DK 3500 V
-
Check redrc.net for the full info of changes and extra info.
-
Hotbodies Ve8 is just with plastic chassis so not a basher.
-
My 3 first RC's are lying in a box i parts.
A Falcon, Midnight Pumpkin and a Boomerang.
Also some shells for a few cars. D8e, M05, LRP TC and a Mclaren F1.
But first the living room need to be finished
-
You only specify 1/10 and belt driven.
Must it be onroad or is offroad also ok?
-
Looking superb.
Is it only some of the plastic parts that are re-infoced in this model?
I have the original one so no re-inforcement in that but they come as spares.
-
Looking forward to the next parts.
What is it you must order though?
-
Congrats. Now it is just waiting for it to arrive :-)
Then you also don't have to modify the chassis to make the Lipo's lie on the bottom of the chassis.
Thanks Si Coe.
Is there a big difference between the slipper and double slipper? Performance wise.
-
Du you mean that the 501 pullys solve the melting problem?
-
-
I'm getting one after xmas.
Found this on youtube a few mins ago. Nice promo video for the lunchbox for it's first release...
I remember that video.
It was included on a videotape i had with a series of promo videos for their other cars.
Don't remember how i got it. Maybe together with the Boomerang or the Midnight Pumpkin.
-
This will probably be held again in 2014. It is in Denamrk.
Only the first page is danish.
-
You are correct Smithy111. I have the Vorza on my brushless D8. Fits fine with the rear body post from the vorza also.
-
1/10. For Tamiya F104 amongst others.
-
-
I think DE racing makes them and they are not that expensive.
They at least make them for the Ve8 ,D8 and the D8T
-
I have almost the same setup with stock chassis and my 1900kv motor is perfect for the tracks i drive on and can follow the nitros without any loss in speed.
My Ve8 is also running 1900kv and so are most of the racers in DK when running 4S.
-
Here is another type. directly for 230V
-
I did it quite a lot cheeper.
Just fount a batterytray and motormount for the D8 conversion and it runs fine.
A motor between 1900 and 2200 kv will suit it best for the 4 cell batt.
A 150 Amp ESC from hobbyking or a Xerun 150a.
No need for extra parts. Maybe just a pinion 16-17t for a 1900kv motor
-
And for only 30 extra at modelsport you get the X2SC which has alu dampers, turnbuckles, Fibre-reinforced plastic and ball bearings all around.
Ups. Not any longer. Just bought the last one.
Edit:
Damn, They canceled the order since they had no more cars
What did the postie bring you today?
in General RC
Posted
Vorza chassis with side guards and battery holder and servo mount for my Ve8.