Tatts

The problem is its

It was built by proflight UK so I'm sure they did this. I have some graupner on order so will look into how to balance them. The multistar 6600mah should be ok if what you say is true, today I tried max amp draw and only once it went above 25A (35A for about 2 seconds) and that was me flying it silly like a 250. The first thing I need is the gopro 4 link board so I can actually see what the gopro sees but no one in the UK has any

Nice looking build. I can vouch for the gopro 4, will you be running it naked or getting something to protect the lens?

Thanks for all the inputs. I got the props wrong, they are 10x4.7 and the motors are sunnysky 980KV (will graupner 10x5 fit ok?). I was seriously thinking about 750kv or sunnysky 800kv but today with my alarm set at 3.5V (store that built it told me to use 3.3V) I got 10mins 1 second off one pack and 10 mins 10 seconds off the other. 10 seconds after landing the lipo's showed 3.7V and when I got back both the alarm and chargers say 3.8V so I may try 3.4V on the alarm? The ESC's are Proflight V2 30A so should be ok should I wish to change motors. Not sure how I would set them up though, this is set up perfectly with these motors (50% throttle hovers perfectly). If the 10C 6600mah will cope with my A draw I may just try them, I'll weigh my gesnace and compare. Are there any other light / slim lipos I can look for? Ideally around 5000mah? I don't mind paying up to about

Thanks smeg. I didn't think 10C would be enough? (I forgot what amp it pulls WOT, tells me on the osd). I don't mind paying for a battery as I almost bought the phantom 3 and them batteries are over

I've recently bought myself a TBS Discovery Pro premium package and plan on using it with my gopro 4 black. I've got 2 gensace 4s 4000mah batteries and had 2 outings with it (4 flights). I set the alarm at 3.8v with the first 2 packs and got about 6 minutes. I've since changed it to 3.6v (3.8v rested) and I got 8 & 9 minutes from the next packs. Now what is the best way to improve this? I have tried finding a dedicated forum for help but failed so I'm hoping we have a few people here. Also, anyone else played around with the gopro settings for the best quality? (save me some time). The kit for those interested...

No offers before I break it? after spending so much time building it

Sorry it sold complete

Not clued up on current prices but surely the W6 is worth

Forgot to mention ... All the screws have been replaced. New fuel pipe, fuel filter, waterproof air filter (all sealed), Aluminium diff casings (purple), Spare pipe, loads of engine bits, Clutches, flywheels, clutch bells. I have some glow starters and chargers somewhere which I will throw in if I find them. Make me an offer as I would rather see it being finished and used rather than collecting dust.

I spent a while building this with a lot of new parts, got to 95% complete and its sat on the shelf since due to lack of time. Not the usual crap you find on ebay. It has a F4.6 engine which I haven't long rebuilt with new glow plug, new crank case with new bearings, new bolts, new owb and new pullstart (not started since). New big bore shocks. New bumpers / skid plates. 3 speed gearbox with reverse (hooked up to channel 3) Suspension mod plus 17mm hex kit (cost near

I have a ansman w6? maybe a DX3S?

Still looking? I've got a savage x I built with almost all new parts. Has big bore shocks, suspension, 3 speed with reverse, all savox servos etc.

HPI ELC-6S (Rebranded Castle MM2) and Castle 2400KV Motor with 3.2mm and 5mm shafts? It's in a rally at the moment and could provide the rpm mounting kit and pinion.

One more bump

Esc and motor are worth about

Depends what you class as a roller as there a lot of upgrades on it so the price can vary quite a bit.

With postage, duty etc. the mips owe me

SCX10 gone, Rally still here but I can't bring myself to break it

Last drops before I buy dust covers for them

Price drops before I split or try my luck on the bay.

As per pm's, the prices are not set in stone (I didn't want to brake any rules). If I do break the rally, it won't be individual parts as I don't have the time. Not sure what to do yet, I wanted to give someone on here the chance at owning a 4S capable slash for a sensible price before it went to the cannibals at the bay