andyllewellyn

sent you a pm andy

replied andy

they went but have another pair in another thread andy

shredders sold andy

orion lipos sold to truggy monster andy

bump

bump

BMM is where i usually get them(bolten model mart) andy

120 amp esc so you need a constant of at least 120amp 5000x25c= 125 amps anything over that figure will be fine cheers andy

the charger is just to show the battery voltage and not for sale cheers andy

bump

bump

bump

motor esc combo sold just the batts left cheers andy

bump

bump

hey guys have this and not using it so logitec 2.1 pc/home cinema/gaming has 2 satellite speakers and a sub with a controller/interface really big sound for such a small set up some pics after

I found that a set of truggy wheels and tyre's really helped with the handling and with the p2 rockers and stiff spring it is almost impossible to roll it whilst cornering don't bother with the lt rockers unless you want it jacked right up andy

are those old austin maxi's or woosly sixes?? love an old car i do andy

you could bend it back but be careful not to snap it what size/length as have a few lying around? cheers andy

This is a sad day indeed but the time has come for me to let go of one of my e-revo's. Got this as a roller off a forum member about six months ago. All the plastic parts that were grey have been rit dyed black and look really nice(chassis, rocker arms). Single servo conversion with a carbon blanking plate to cover the hole, the servo is a savox 1256(20kg titanium geared) that is in great condition and is a great addition to this truck. It has a sc8wp waterproof 120amp esc that is 4s compatible(tried 6s but found it silly fast and 4s to be spot on) that was new six months ago and has only been run about ten times(bloody bad weather) and sits on a raised carbon plate. It has a leopard 2200 kv four pole motor that is great and never skips a beat. It has a set of xtm grinders on truggy rims(these are really good and make the revo even better thanks to there low profile and offer tons of grip. IT has 2x 2s orion 6400mah 35c hard case lipos( these are fantastic as they are made specifically for the revo, they last a good 40 mins runtime and because of there design and snug fit they actually increase the rigidity of the chassis which is good for the handling). It has a losi 2.4g tx/rx form a losi lst2( i think) and has analoge trims(no scroling through endless menu's and runs off 4x aa's 17mm hex conversion Red alloy push rods up front Spare arms all round and spare alloy body shocks(think there the traxxas gtr one's) 2x set of springs. In good overall condition, has the compulsory scrapes underneath and a few screws have a bit of the red stuff. Now for some pics One of the spare shock needs a new cap(not much

bump

bump

hey bud this is in the wrong section but this would be a great platform to build on(just needs electrics) can supply motor and tx/rx and esc http://www.msuk-forum.co.uk/topic/165492-caster-racing-fusion-ex-15-pro/ cheers andy

replied andy