prussian.guard

are there any other flywheels i can fit to a mach 21 engine as i cant find a shop with any in stock. will a mach 28 set fit.

just put a picco p3 in my inferno and it goes like stink.never seen such performance from a .21.

could somebody point me in the right direction to buy a manifold for a picco .21 as my hyper 7 manifold is too big. thanks in advance

Set the master needle IN until stops, then turn OUT 4.5 to 5 turns. Setting for the black low end needle is OUT 3.5 turns out from flush. Setting brass head mid range needle, should always be flush to the case

i had this with mine and it turned out to be a leak in the carb.swapped it out for a kyosho inferno carb rather than the plastic rubbish that comes factory.

55" SAMSUNG PLASMA AND ITS BLOODY GREAT FOR XBOXING.

priory park in reigate.

its so you can put a boost chamber onto the engine.there not really worth putting on and you will need a starter box to start it.

there ok.cheap and cheerful but wont take a lot of abuse.i had one but binned it after a couple of weeks.if you can stretch to a hyper 7 or something similar

hi people i made the mistake of purchasing the kyosho m p7.5 us sports.the buggy side of it i cannot fault but the engine is a complete waste of time.rear bearing,conrod,piston head you name it ive changed it.ive had nitro cars for years so tuning is not a problem.im looking at buying an sh.28 6 port.loads of people have said they are good engines although i had never heard of them.is this engine a good investment as im only bashing it around my local park. thanks in advance