Jump to content
MSUKForum is a participant in the eBay Partner Network (EPN). When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Read more >

tanveer

Members
 View Profile  See their activity

  • Posts

    1,243

  • Joined

  • Last visited

  • Days Won

    15

 Content Type 

Everything posted by tanveer

  1. tanveer
    im just in 2 minds at the minute its either get rid of the baja and get a savage 4.6 or spend money on the baja what would u guys recomend
  2. tanveer
    its not my thing 2 be honest was jus driving it around in my garden and thought nitro monster truck would be better for what i want this thing is just too big!
  3. tanveer
    i payed 380 on tuesday and its bone stock mate
  4. tanveer
    im considering getting rid of my baja clone for a savage 4.6 just wondering what sorta price i would get for it?
  5. tanveer
    also thanks alot topper
  6. tanveer
    thankyou very much for that spudski much apreciated..and il get them orderd asap iv got a replacement screw in there for now but its not the original and i dint wanna tighten it too much incase i crossthread it or something
  7. tanveer
    yes spudski its the little allen bolt that actually goes into the rear axel there is one on each side i need to get a replacement one frum sumwere
  8. tanveer
    to be honest mate any hpi baja clone you get will be nothing in comparison to the real mcoy but u can hop it up to the same spec of a hpi baja for less than a hpi baja thats the best bit and 1 of my mates has got a km baja they are similar to the shengqi i cudnt notice much diffrence just get the 1 thats easiest available to you mate:)
  9. tanveer
    its a bit of an awkward part to explain but the little allen bolt that goes into the back wheel hub the 1st bit u remove before being able to take the wheel off went walkabout lastnight just wondering if there was anywere i could get a spare 1 from? Thanks alot guys
  10. tanveer
    thanks alot guys much apreciated..and its a shengqi baja clone
  11. tanveer
    im either getting the tgn xcan or the dom pipe and was just wondering if i would have to take my engine out to install these? hopefully not:P thanks alot
  12. tanveer
    well the reciever battery is fully charged just did a check on that now so it must be a new servo any1 got an idea of what servo i need?
  13. tanveer
    today i realised my baja rep has alot of slack on the steering and the back wheels seem to wobble a bit too just wondering if this is normal and i have tightend them on properly still seem 2 do it..thanks alot for any time you guys take to help me with this
  14. tanveer
    well i think iv made my mind up tgn xcan with 6inch stingers are wot im guna go for..also would any of you recomend rpm arms or would the standards do me okay for a whilee?
  15. tanveer
    its either that pipe or the tgn xcan with 6inch stingers im not too sure yet but will get 1 of them orderd by the end of 2moz..will get sum pics of the baja up 2moro aswell:D
  16. tanveer
    well i got my 23cc baja rep 2day ran it pretty slow for the 1st tank and after that this thing is insane, i new petrol cars were fun but this thing jus sounds like a motocross bike:P..i think a performance exhaust is needed though im pretty scared about bashing this thing tho how strong are these compared to the real mcoy?
  17. tanveer
    thanks alot for that traxxas man 23 il get the filter changed and just run it gently for 1 tank just to be on the safe side i think..im just hoping this thing is gunna be a gud bit of kit now dont wanna get a crappy quality car on my doorstep
  18. tanveer
    so does the shengqi baja not have a killswitch on it?? and if so how am i ment 2 turn it off untill i manage to get the killswitch sorted?
  19. tanveer
    okay wiked mate i will do then after the 1st tank i can pretty much do wot i want throttle wise? and what would be the best pipe for the buggy..
  20. tanveer
    hey all well i got my shengqi baja clone on its way to me 2moro..and i was just wondering how long do i run the engine in for and how fast do these sorta things go
  21. tanveer
    hey guys just wanted some advice really might get the losi speed nt over the weekend anyone had any experience with it? is it durable and most importantly would it get imbarassed by my brothers jato 3.3...thanks alot
  22. tanveer
    as the title says just wondering if the rpm arms for the lst2 would fit a losi muggy? thanks alot
  23. tanveer
    okay thanks alot for that mate
  24. tanveer
    thanks for that bud what sort of top speed would i be getting with the 12t vented clutch bell would it affect it at all? and if i was to buy the muggy and run it in for a while with the standard wheels would that be okay as i would jus be driving on a smooth carpark?
  25. tanveer
    im looking for a nitro monster truck or a truggy just for bashing around in my garden i was wondering which 1 of the 2 i have mentioned would be better suited for the job? i know about the muggy clutch issues and also could sum1 tell me were i cud get the 12 tooth vented clutchbell and what clutch shoes would i need? thanks alot for the help guys
×
×
  • Create New...