vrooom

yes, need lipo batteries, and battery charger, and correct pinion / spurgear. It accerlate but top out quickly.

2 battery box, one on each side.

Hiya This is Savage X that has been converted to full spec Flux. It has full Flux TVP Chassis, motor mount, motor plate, battery box, ESC tray, along with HPI torx 2200kv motor. Powered by xerun 150A esc. Integry rear alloy hub. hot bodies dirt bonz tyres mounted on chrome 5 spoke rim. Alloy diff case with 4 bevel gears. running 47 / 14 gearing. This gearing need upgrading . Few spare parts including nitro X chassis, fuel tank etc but not much. mostly plastic parts. It has usual savage marks. comes with no body shell. Comes with acoms techinplus controller.

Nice interesting chassis!!!

I am looking for small receiever 27mhz AM, must be BEC, I have regular HPI RF-1 receiver 27mhz for swap? Any receiver will be ok as long its sized under 40mm long. Any offers?

I am conisdering to selling my HPI savage and Tamiya M-05 How much they are worth on current market, i have no idea. This Savage has been converted into full Flux spec from SS kit 7 years ago. It has Xerun 150A esc with HPI tork 2200 motor. HB dirt bonz tyres on HPI 5 spoke rim. It has full flux chassis, motorplate, clamp etc. 4 bevel gear in alloy case, along with single speed gear in the gearbox Only thing orginal from SS kit is shock tower and gearbox case, suspesion arms. plus nitro X chassis, and spares. Comes with Acoms techinplus radio set. and Tamiya M-05 with Ansmann shell. Has Ezrun 35A esc with 4300kv motor, TA-05 ball diff (Limited slip diff to you and me), on tamiya slicks, fully ball raced. plus Spares. How much i should get it for?

What? why it dont do wheelies

Anyone got one for sale ? Looking for xerun 150A esc + motor. Jay

Hiya, I know this is kind of wrong time to sell, xmas day is coming near... I am selling my never used Turnigy 5.0 14.8V 5000mah lipo matched battery pack. It was supposed go in my savage brushless conversion but this project never got off the ground Spec. Turnigy Minimum Capacity: 5000mAh Configuration: 4S1P / 14.8v / 4Cell Constant Discharge: 20C Peak Discharge (10sec): 30C Pack Weight: 412g Pack Size: 144 x 48 x 32mm Charge Plug: JST-XH Discharge Plug: 4mm Shrouded Bullets £25 + £5 postage. battery sold HPI Savage brushless Motor mount. I dont know who made this. this is designed to fit standard Savage SS / X standard nitro motor plate. so very easy conversion. I tried it. it work nicely! It accept standard 25mm 540 size motor Bolt diameter. (mamba max, etc etc all fit) outside diameter is 35mm or so. the o ring clamp is removable. used it once for less than 2 min. The bolts on it arent threadlocked. Made of alumminum. I bought it not long ago. £15 free post. I accept Paypal. Please email me [email protected] if any question.

how much? pic??

Anyone got one for sale? preferably stock.... Let see what you got?

Noone want it?

I am selling my unused tamiya TT-01E rolling chassis, because im bored with 4wd onroad car. (im into monster truck, and fun r/c stuff) full bearings setup apart from steering. tamiya's hop up alloy propshaft with alloy cups The tyres / rims is in new condition, and is not glued. brand new Subaru impreza 2002 bodyshell (bug eye version) the chassis etc are new unstratched. it hasnt seen a tarmac road. It needed a servo post to complete it, it comes with HPI SF-1 servo, has servo saver with it. You need ESC / MOTOR / RADIO set for it Looking for

Not for sale now i made a deal with someone.

Hi i have replied to your pm.

I used mamba max 5700+ system.

you can use 1/10 or 1/8th system. yeah i was out playing in snow last week. left indoor to dry out naturally. under a year. so not very old.

Hiya, I am looking to sell or swap this brushless converted hot bodies lightning 10. It was previously nitro version. So the pic tells thousand words. It uses RC monster motor mount, with custom battery holder with velcro strap. that was done by not drilling into chassis, used the existing holes on chassis. I would like

It is set to reserve alright, but it wont excute it anyway.

I got Ezrun 35A combo with 4300kv (9t) motor, currently installed on my tamiya m03, on 3300mah 2s lipo. I got programmer card with it. I can get all option working, but i couldnt get my car do reverse at all. the esc just lit up the red when i pull the throttle down twice. any idea what up with it?

I am conisdering to buying a Acoms Technisport 2.4GHZ radio set. I am curious how bad plastic is, because i read various review site that say plastic is poor and filmsy... i using HPI TF-1 (broken now, very poor plastic quality), sawna blazer sport superb quality, Acoms AP-202 stick radio set superb quality. how does acoms technisport 2.4ghz compare to rest like tf1, acoms ap-202, sanwa plastics?

Hi I am new to this forum, I got bit of issue with my savage this morning,I played with my savage, with new sts .28 which is previously broken in, which using same glow plug. The issue is, when i start the engine, it started good, engine idle good and I am on little rich side, but when i remove the glow igntior, the engine stops, i can restart it just fne, as long i hold the igntior in, it will keep running. I've tested my glow plug, and sure it lit up bright orange. So are my glow plug knackered? or if it underlying issue that i am not aware of? Jay