Search the Community
Showing results for tags 'roller'.
-
Ansmann X2 kit, brand new in box. I bought it 9 months ago with the intention of building up and providing a home for some spare electrics.That's not happened, and it is just taking up space on the shelf. This is the race version of the Mad Rat. Carbon fibre reinforced plastic and aluminium threaded shocks. Looking for -
-
hb cyclone brushless drifter in great condition new 10kg servo fitted price is
-
Item description: Losi 5ive that I purchased from richarddenton1982(member on here). From the day I got the car it couldn't run for more than 15-20minutes before overheating. After creating a thread and getting some advice and no reply from Richard I decided to open a dispute to replace the engine, I won it but haven't bothered to purchase a new engine because of the weather, size and noise and general boredom of RC at the time, I want to use the money from selling this to fund some upgrades for baja. What you get: Hitec HS-805MG servo (throttle) Hitec HS-5765MH servo (steering) Bartolone Racing gear mesh plate Bartolone pre-drilled clutch housing Losi Air filter Air filter outerwear Voltz 4600mAh receiver battery Losi tuned pipe FS-GT3B tx Brand new rx Other bits (see images) Upgrades: Carbon Fibre brake discs Losi Alloy Chassis braces Losi Alloy steering brace Carbon Fibre steering link Titanium King Pins Brand new tyres Proline Trencher clones Photos: Car: http://i.imgur.com/TkgoKqk.jpg Shell: http://i.imgur.com/9AeCHUS.jpg (its a bit battered but will do for bashing!) Bits: http://i.imgur.com/Uos4Ei0.jpg The car is now all back together, I will get a pic tomorrow with name next to it as puppy is sleeping next to it atm! Price: I would like
-
Hi for sale is my spare mp9 The car is brand spanking new, never been on a track. Was built up to use as a spare for club meets car but didn't have time to use it and no point of it sitting around. A few parts were used from it Shocks were used but have rear orange springs and 1.3 8 hole pistons and had new cap inserts replaced and orings ECT Brake linkages, pads and discs Fuel tank Clutch and engine mounts Radio tray They all haven't had much use and the use won't charge performance of the car. Car will come with box and manual I payed 640 for the car Would like to get 490 for the car with a used bitty designs shell 510 with a new bitty designs shell 615 with a plus 4 + pipe and servos engine is 2 and 1/2 gallons old bearings replaced at 2 great condition good condition head Extra 10 pound for a new Answer rc clutch setup Can also do a RTR setup with everything to go racing just drop me an email. (All prices include postage) PM me for more details
-
for sale, message me for price - hpi trophy 3.5 - spare chassis - hpi trx - spare plastics for wheel spacing
-
FOR SALE: HYPER 7 BLACK EDITION - NEEDS AN ENGINE AND IS READY TO GO - SPARE WING - FEW BITS AND BOBS SPARE (STEERING KNUCKLES, PLASTIC BITS) - HOBAO TX - HPI RX - ANSMANN METAL GEAR STEERING SERVO - HPI SF-1 THROTTLE SERVO - HOMEMADE CUSTOM FRONT BUMPER - COMES WITH BOX (A BIT BATTERED, BUT STILL TOGETHER IN ONE PIECE) - HAVE A PRINTED OUT INSTRUCTION MANUAL TOO, COMES IN HANDY FOR PART NUMBERS)
-
Up for sale is my brand new Proline Pro-2 Short Course truck, this is an awesome bit of kit but it's too big for my needs, I was expecting it to smaller than it is. The shocks still need oil put in them and the toe & camber has still be set. The wheels/tyres came pre-glued. It does not come with a Flo-Tek body shell, it comes with a Proline Evo body shell instead as I preferred the look of it. Window masks and stickers will be included. I'm looking for
-
The boy don't wanna race no more, here is my mi4 cx Upgrades are Titanium turnbuckles Spec r gear diff Twin point steering Rad shape lipo tray Spares are 3 sets of used but good mini pins A- arms front and rear Springs Belts Bottom chassis may as well be new Top braces And anything you can see in the pics Very very awesome racer, you will not be disappointed, let the pics do talking I'm looking for
-
Afternoon Gents selling my kyosho blizzard to fund drift cars built this last year brilliant in the snow looking for swaps for lipo's/chargers/yokohama drift chassis loads of pictures in here : https://www.facebook.com/media/set/?set=a.2709099443124.2141814.1125973339&type=1&l=302b4e3e32 Pics for thread here
-
Hi all I am wanting to swap this for a tamiya stadium blitzer or nova fox or sell for
-
Roller Hyper 7 TQ Sport 2 Rolling Chassis - Sold Please Close
Joshyjol posted a topic in For RC Sales
Hi, Keeping short and simple! Perfect for BL conversion! CNC Chassis Braces Losi racing tires Nanda blocks ansmann on-road tires Savox servo w/aluminium servo horn aluminium front upper pin holder Homemade front bumper and shock tower gaurd carbon fiber top decks Near new shell and wing Aluminium wing struts Shock sox Yellow side pods Diffs are absolutely fine and not had much wear (see condition of the chassis). As pictured there is a screw stuck in one of the center diff poles but if you are converting to brushless you dont need this anyway. Sadly no linkages as Ive lost them and no engine mounts. NOW SOLD Will do it cheaper if collected from Bolton! Thank you! -
For sale is my Micro-T rolling chassis, its just been sitting around for a while and not getting used so thought i may as well sell it to a fellow MSUK member Anways the Micro T has the following upgrades: -Brand new chassis -Aluminium front hubs -Aluminium bulk head -Aluminium front and rear shock tower -Aluminum oil filled shocks front and rear -Threaded axles -Aluminium nut bolts -RPM Front bumper - And i believe the wheels are the 3racing? cant really remember to be honest You need your own electronics but there is the stock esc, battery and motor included although not sure if theyre working correctly Also included is a Traxxas transmitter, and a few spares such as connectors etc. Looking for around
-
For sale hong nor x2 crt pro brushless roller Solid truggy just needs combo dropping in and she's ready to bash Cvds tbones cnc everywhere good condition
-
last few cars for sale what you see is what you get sold as seen no returns buyer to cover fees postage included all items will be sent via courier any question etc please pm so this thread can be kept clean mainland uk only unless you pay the extra hpi rs4 3 evo+ roller very good condition rs4 this was a BEAST before the engine conrod went (engine is included but in bits) has a sf10w and tower pro servos fitted has upgraded heavy duty diff shafts on the front, sway bars front and back and performance exhaust has just hand a brand new chassis fitted which cost me
-
Hi all its time to sell the mi5 shock horror, the yokomo bd 7 is at a point now where i can comfortably say its runnable lol The car itself was purchased by my dad in July and has been run both outdoors and indoors, there is nothing..i repeat NOTHING broken on the car and has the schumacher team treatment thanks to John Pape etc. The chassis since it has been used outside has a few scuffs, when i say a few i do mean a few, the worse of it is up front by the plastic bumper but its all superficial, flip the chassis over and it has usual marks from where a battery has been sat etc, nothing major. it comes with a few spare front hubs as a precaution because the original had a tendency to strip in a light crash, which my kit set did, so changed em out for v2's and the spares are also v2's but havnt stripped any since, but they are there anyway. ill clean the car before sending off, belts are in perfectly fine usable condition, some slight fraying but nothing thats suddenly gonna give out on you, and i have not broken anything or splintered any carbon, overall very clean car. Screws and fixing for servos will obviously be included. Kit spur as seen in pics also included its 48 pitch Price i want
-
Up for sale is my Mardave V12 AC12 GT12 kit with extras, this has never been used, only partially assembled. For those of you who know Mardaves, may be wondering why it has a black pod, I requested this at time of ordering and Chris @ Mardave was more than happy to include it instead. Extras: Carbon front bumper - part number V200B Carbon comp lipo tray - part number V129C Front medium springs - part number V6CM Rear medium springs - part number V9CM Pod inserts with .5 increments The kit will come in the original box with the manual and set-up sheets. I'm looking for
-
Losi 2.0 eu in very good condition, comes with a few upgrades including 3.0 front end (original included) , 3.0 shock towers, hong nor big bore shocks. There is a box full of losi shock spares and a few new in packet spares, arms ect 160 posted buyer pays fees
-
Selling up a few things. Next on the list is my CRT.5 brushless roller. Bought it early last year and ran a Tenshock-Ezrun combo in it a few times before buying an SCTE and swapping the electrics into that. Brilliant little car and handled 3s totally without issues. Not been used since last summer (see photos) and where my full sized CRT broke some arms, this thing just kept on going. Its got a few upgrades, including bigger shocks (not sure what they are off as were on it when I bought it), Carbon fibre shock towers and T-Bones front and rear. The brushless kit is from a SCRT10 and the battery tray has been modified to handle larger batteries. There are a few worn cheap plastic parts that need replacing but it still runs fine, just could do with a little TLC After
-
Roller Swaps,tamiya df03,Want tamiya stadium blitzer or other 2wd
mikef350 posted a topic in For RC Sales
Hi all Up for swaps is my df03 avate mk2 which is in good condition,the only down side is that the wing has some areas where the paint has flaked. I would like to swap with some one from the uk and i would like (pref rere) fox stadium blitzer blackfoot or monster beetle wild one frog etc etc price is to obey any forum rules. -
Most things considered as long as they meet the criteria! 1) 4WD 2) Sub
-
Hi all for sale is my AE B4 was being set up for racing there is a problem with the diff i rebuilt several times but it might need a new one comes with lots of spares, an extra chassis and body shell a unpainted and uncut wing also. ill also leave in the Alturn High speed servo which works perfectly Need this gone asap Paypal only Buyer needs to add Fees
-
Xray xt8 roller with brushless conversion fitted, comes with following spares. 1 pair Rear hub carriers NIP (left and right, one was opened to get the spacers out but there are 3 new spacers in a separate pack pictured) Upper relief joint NIP (wheel end of the upper arms) front lower arms NIP (left and right) C hub NIP (left and right) Relief steering joint (wheel end, 1x (opened pack) Steering joints NIP (inner) Front and rear gearbox casing (not in pack but new and unused) 2x used chassis 1x used rear wing Shell has seen a lot of use so is needing replaced but still fits and offers protection! Comes as seen in pics, was run on 4s and went brilliant on a 15t pinion. Cnc front and rear towers, front chassis brace and top plate, hinge pin holders and centre diff top plate. Probably Has an odd screw here and there, some slight surface rust on the odd screw but its used and works well!!
-
here we have my hopped up revo roller fitted with foc,, rpm arms all round,,rpm bumpers,, cvds all round and centre,, red alloy pushrods all round,,sway bar kit,, uprated springs ,, 2 shells etc etc the revo does need a diff cup at the rear all the gears seem fine but the diff cup has gave up the ghost cheap fix though,, but has had some cash spent on the hopups ,, looking for serious offers or trade for a good truggy roller ,, the revo will also come with the spares in the pics prices if split are rpm arms and bumpers
-
For sale - HPI TCX drifter - Has CS mod brand new shell, wheels and tyres... All you need is a full set of electrics and away you go! Great car, comes with a few spares, spare shell and wheels and tyres - Not sure how much its worth...
-
Afternoon all, I bought another s411 with the view to make it a wet car. Given up on the idea so I'm selling the roller. Only ever been raced on carpet - the chassis plate is spotless! Awesome car - I love mine. Items included in sale: Serpent S411 Rolling chassis - spool up front, diff at rear, used vtec 24r wheels/tyres.