Jump to content

Vanden Plas

Members
  • Posts

    53
  • Joined

  • Last visited

Everything posted by Vanden Plas

  1. Are you saying you brought some off a different seller and they are the same size as the ones this guy sent you??
  2. This is weird as the front and back arms are different in design as well as length so I doubt you have the front ones. The vantage rear arms are very similar in design but doesn’t have the whole of the hinge pin covered, according to the drawings although I don’t have a carnage so I don’t really know. I would recommend just putting in the part number ftx6321 into google and comparing what you have to that! https://www.modelsport.co.uk/product/365910
  3. So had a incident with the vantage, was hooning it at full throttle and decided it would be a good idea to slam the anchors on and the front dived and dug in the ground sending it about 10 feet in the air! I think I may have made this thing too quick!! Anyway snapped the front chassis clean off, she looked a sorry state crumpled on the floor ☹️ so now she has a shiny new aluminium front end and new bumper so I can just smash the main chassis to bits! perhaps just be a bit easier when breaking from full whack!
  4. This is my fly sky tx that has only had a handful of uses, I have had real problems with it having limited range and glitching, brought another rx as I thought it would fix it but it was the same. I read that they have problems with interference from electronics so perhaps it was where it was located in the tight bay of my teckno 410, anyway I only want a £10 for postage as someone might have more luck with it than me! It is basically in new condition. I haven’t got the box but I do have instructions. Dm me if you fancy giving it a go!
  5. Small pair of needle nosed pliers, use mine for all sorts
  6. Not sure how changing the spur will be possible with the slipper clutch setup on the vantage as the clutch pads sit in recesses in the spur, other spurs will just be flat so the slipper clutch pads won’t sit right. You can get steel versions, I have this and run it with a 27t steel pinion and have had no issues since I fitted it. unless of course they make 32 or 48 dp spurs with the machined bit for the slipper!
  7. Spent a good amount of time modifying and then setting some lovely decals on my new rear wing 😀 only to take it out and this happen in the first 5 mins! ☹️ back to the drawing board!
  8. Looks like a sensible option, I am not sensible, I got sick of the front bumper breaking so I just cut that bit of the chassis off and have no bumper!!! I did upgrade the shocks to big bore ones that are much tougher than the plastic stock ones tho!
  9. Hmmm, white one was more brittle than a twig!!! One flip and this is how it looked!! the black version lasted ages and was very durable. Must be made of completely different plastic! Probably best to avoid this one!
  10. Talking of wings… mine finally gave up the ghost again, it does get punished. So I got the white version, it is a HSP racing one. Think it looks cool with the pro-line wheels 😃
  11. The rc world is your oyster!!
  12. I got a generic wing off eBay, as the vandal wing was out of stock at the time. Looked cool but did require quite a bit of modification, so grab a vandal one if you can
  13. Thing with buggy shells is that they are all made pretty tight fitting so I think you will struggle to find one that isn’t made for a vantage that will fit, didn’t find a problem with mine fitting with the stock gear in it, and it is still going many crashes on, the rear wing on the other hand was more brittle than a fallen autumn leaf! I haven’t read through all of this thread but don’t remember seeing someone use a different buggy shell on a vantage, maybe a bit of cleaning up of the stock wiring with some well placed cable ties might get the cables out the way so it fits nicely. it was necessary for me to cut a hole in mine when I upgraded to a hobbywing 120A esc and motor where I put a double cooling fan on the motor but you shouldn’t need anything drastic like that with the stock gear!
  14. Have you calibrated the transmitter to the esc? hopefully that should sort it
  15. You could check the gear mesh on the pinion and spur, mine was way too tight out of the box! Other than that you could just check screws for tightness and then enjoy…… till something breaks! Then buy multiples or hop ups of those bits 😀
  16. Oh yeah I think it the 120A max10 esc combo that has the 5mm bore, the downside to the 60A won’t run 4s which I think you wanted to do
  17. I have a max10 combo and it has a 5mm bore, pretty sure all the 3660 motors come with 5mm bore tbh
  18. I believe that this is a 3.2mm motor and the esc combo can take 4s, not sure on the quality tho https://www.elitemodelsonline.co.uk/More/Electronics/Motor-ESC-Combos/ZTW-Combos/101693-/110-Beast-SLL-Combo-with-45A-ESC-4P-SL-3650B-3450Kv-Motor?fo_c=3984&fo_k=e8dd6af5207e0ca4e4db4b655aad09f2&fo_s=gplauk&gclid=CjwKCAjw6dmSBhBkEiwA_W-EoMAQIXt0UO44JDPKSIeepXQ1Gxur-PfO_lTp2i5aHUGN6JEetQnh3RoCRdoQAvD_BwE
  19. Could you not just get a new rw pinion to fit a 5mm shaft? If you are spending out on a new esc combo then tis just another small thing to get
  20. @Pla i just had a thought, when you do come to replace your spur and pinion make sure you watch a YouTube clip on how to properly set them up, this can be a little tricky. If you do it too tight it can cause it to bind and you will destroy your running gear and to loose and it will mash the cogs up. There is a sweet spot that is best shown rather than explained!
  21. This charger only uses a charge rate of 1.5A so won’t charge it very quickly and advised by ant it won’t be able to discharge or store lipos. As advised the steel spur is a great upgrade, bear in mind you will need to get a steel pinion as the stock one will last 5 mins, also make sure u get a spur that has the face machined to hold the slipper clutch, I made the mistake of buying a flat one and the slipper clutch tore itself to bits! Here is a good one that I run now https://www.ebay.co.uk/itm/265004970955?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vFJcSCD9QMu&sssrc=2349624&ssuid=uDWqHc-zSrO&var=&widget_ver=artemis&media=COPY
×
×
  • Create New...