Keith Williams

Definitely in need of a full FM radio setup and a battery (7.2v) Other than that, it look good to go.

Thanks, spotted the spoiler on ali Express, it's semi rigid and has stood a couple of rolls and cartwheels. Less than £2 just had to re-drill the mount holes as the originals weren't right.

Finally got round to a few more mods (due to crashes) Alloy floor pan, It's a Chinese job but fits perfectly! latest was to fit a set of Injora shocks Via AliExpress. Very nice shocks! not had a chance to test drive it yet but feels much better. only gripe is that the ball joints are quite loose fitting. https://www.aliexpress.com/item/1005001325654336.html?spm=a2g0o.order_list.0.0.113b1802WLkczP Will post pics soon 😄

Jacking screw on the wishbone tightened too much maybe?

It's not a power issue really. I've got a goole combo installed. Seems the only programmer card for it is the, worse then useless, dilwe one - I'm on my second since December, 2 or 3 uses and the bloody thing dies. Hobbywing look a whole lot more professionally made. Unless anyone knows of a programmer card that works with my combo ?

Was looking at a MAX10 to pair up with my 4300kv 3s combo. I read that the MAX10 Highest kv motor is 4000. Looks like they don't like 4600s! Anyone know if a MAX 10 60A ESC will handle a 4300kv motor?

https://hobbyking.com/en_us/turnigy-accucell-us-plug-c150-ac-dc-10a-150w-smart-balance-charger.html?queryID=95e10c7555f07f08e2ebd31bf560324d&objectID=79273&indexName=hbk_live_products_analytics Bought this from Hobby King price is great. Shipping is a real killer. Great charger though. Similar on eBay are around £70 - Came without a Deans adaptor but they're not that expensive!

Thanks got one on order 👍

Does anyone know of an alloy servo saver that will fit the Carnage steering? - The standard ones are bloody awful and are a complete b@@@h to reassemble after a shunt. Do the Traxxas slash or the HSP 1/10 ones fit?

If you look closely, you can see the position of the front body mount is about 15mm back from where you'd expect it to be. other than that nothing drastic to change. All you need is a rear wing mount set, a pair of vantage body mounts and a vantage shell

Just finished mine.... pics to follow. Looks far better than the original with the monster tyres. you will have to drill a new hole for the front body mounting in the top plate. Not a hard job use the body to position the hole, then just a bit of cleaning up to do ☺️

The stock spur gear lasted maybe a whole 3 Minutes when I upgraded my Carnage to brushless. Yep 🤥, just changed the motor and esc as a start. Bought the Carnage 2nd hand for £50 as a bit of a project.... Originally for grandson but it's all mine now ha ha! in the process of fitting a Vantage shell now, should be interesting! Motor is a goolrc 3650 4300Kv now with a RW Racing 12 / 45 t steel spur and pinion combo. Pinched the 3S 50C battery from my Riot plane!

The stock spur gear lasted maybe a whole 3 Minutes when I upgraded my Carnage to brushless.