Allan k

Were do i find the best sealed 6x12x4 ball bearings? The cheap ones dont last long in my losi lmt, and the bearings in my sons traxxas stampede 4x4 didnt last very long either, and those are ‘expensive’ traxxas ones…

Yes they do but the one only review/feedback says its loose on the spline… but maybe it was a bad one.. i like the clamp type on the spline they use on the treal though maybe i should give it a try

Hello gents, have been running my lmt for some time now, and it seems the servosaver is a weak point, the stock spektrum servo itself didnt last more than about 10-15 batteries. So fitted a budget SRT servo (25T) wich does a good job but the losi servo saver is becomming loose in the splines and the aluminum hex that goes inside the threaded aluminum tube also now has some play bad straight line running.. I tried fitting a Xray servosaver that lasted no more than 4 minutes! Then it exploded… is there a bullet proof servosaver that bolts directly to the servohorn that can handle those big tires??

Mine should be here early january

Does other batteries than traxxas own fit the new version maxx? Gens ace for example? https://hobbykarl.dk/shop/30-4s---148v/4057-148v---5300mah---60c/

My charger imax b6 charges my gens ace 2s 100C 7500Mah with 5 amp and then slowly drop when reaching full capacity, but it only charges my gens ace 3s 60C 5300Mah with 4,4amp max? Why?

You could just add that wire on any other battery right?

Thanks.. finally got my lmt today, that thing is beast! Does the telemetry battery indicator only work with a ‘spektrum smart battery?

What is the losi part number for the shims needed to adjust the diffs on the lmt?

Okay thanks, what C rating is recommended for truck like the lmt?

Okay, I had the same thoughts. But what is the difference inside the battery? I thought all lipos were 3,7volt

‘Im new to lipo batteries.. I will need a one or more for my losi lmt when it arrives eventually… I decided to go for 2s, but some are high are voltage 7,6volt and not 7,4 what to choose and why?

Hopefully my local losi pusher is getting the lmt in his shop sometime in august.. i hope the reinforced axle housing that should be standard by that time will be better than the old version i remember when the hpi baja 5b came out ~15 years ago they quickly reinforced the rear wheel… guess they misjudged the strength and abuse they would face

The one that broke was that the old one or the new reinforced one?

New or old version axle housing?