Jimplops

Cheers pal 👍👍

Some of those links are screwed into the rod ends different amounts at either end, I'd check the length of each pair to start with

Cheers much appreciated 👍👍

@.AJ. Can be cheeky and ask for a pic of the adaptors in the wheels, as wanting to do a hex on to a plain shaft, but can't get my head round how the wheel doesn't come off the hex as the axle nut will need to secure the bearing without stopping the wheel from turning?

Just realised what you're powering it with 👍👍🤣🤣

You can do it on the transmitter, or just go reverse then forward, but make sure you use 100% throttle settings

Reverse the channel, flysky does the same.

If you're on Facebook then look for North Wales Cheshire and North West scale crawlers

It's a cracking little spot, an old quarry near Mitchell House WTW outside Blackburn, great place for trucks if you avoid the bits with burnt out cars 🤣🤣🤣

Went for a little test run to see how it runs with the Chinquish portals.

Cheers

And when home got round to putting the last bits of bling on, in the shape of Club 5 Racing VS4-10 graphics kit and a bit of artistic licence. Had a mooch round Helsby today with a couple of mates, relaxed chat run than full on so only the one photo while out.

Cheers, That's Rivington near Bolton. It came ARTR so just slapped one of my batteries in. Had a quick mock up to reduce the centre of gravity, swap the carbon plate and the electronics box around and then mount the battery tray across the chassis just behind the front wheels, that'll drop the centre of gravity by 25mm.

Took the founder out for its first run with me, current suspension set up could do with a bit of tweaking, nice and soft for trail, but once it gets a bit more edgy too soft, so will play around with damper oil and preload. I've got some rc4wd rock crushers that'll go, as the tyres on there don't have much grip even vented. With the battery mounted high up in the front is noticeable, so may have a play around with battery position. For it's size it is a cracking truck.

Been around awhile, asiatees was the big stockist, and rcmodelz in Blackburn was the only seller over here off the top of my head lol.