RCmk

Hi the arms I have are for the MT not the XT I think they are different but not 100% sure they are compatible. If they are of use to you let me know👍 Hi I should have all the bits you need for cheap plus I’ll throw in extra spares for free👍

Hi I should have all the bits you need for cheap plus I’ll throw in extra spares for free👍

Bump.

Bump Forgot to mention the spare chassis is a Hardcore Racing titanium chassis. thanks for looking.

Bump... Pm me offers. More pics on eBay and Gumtree. Cheers.

Bump... Any good to anyone? Pm me any offers.. Cheers.

Job lot of 1/10 touring car wheels. Most are Schumacher wheels on Ride tyres and most are soft compound. All in used but good overall usable condition. Couple might need slight reglue. Some of the wheel sets have narrower front wheels. These wheels are for professional racing so of good quality. Brand new set of Schumacher wheels also included. On the set of foams unfortunately one of the foams has a chunk missing out of it. Picture form most of the description. No returns due to nature of the hobby. No buyers outside the UK. Any questions please ask. £85 fee’s and postage included. Thanks for looking.

Losi Speed NT ARTR In very good overall condition. Completely taken apart and cleaned and rebuilt, gearbox taken apart and cleaned and regreased with white lithium grease, new oil in shocks, all bearings removed, cleaned and re-oiled. Motor taken apart and cleaned and rebuilt, oiled where necessary and thread locked. Has good compression. Upgraded Robinson Racing metal gears in the gearbox which is a must as the standard plastic ones fail. Upgraded Savox steering and throttle servos. Spare Hardcore Racing 11001 Titanium chassis, ( rare and expensive) in used but decent condition, has wear marks; but pin straight and solid. Brand new hump pack battery included but you will need your own charger, but it will come fully charged. Will supply a glow starter fully charged, but you will need to get your own charger. Always used after run oil after use. Piston always left at the bottom of sleeve after use. Losi drill starter bit, so put it in your drill and car fires up instantly. Chassis has a a few marks underneath but not much and is in excellent overall condition as is the engine, hardly used. These Losi’s are fast, fastest in its class and the engine is a screamer, this is well sorted overall and new owner will not be disappointed. Bodyshell is in good overall condition but has some wear on it, and the spoiler was missing so I made one out of plastic and wrapped it in carbon fibre wrap. Will need to adjust and fine tune the throttle and brake linkages, but is pretty much set up already, just could do with a fine tune. It will not come with a radio controller or receiver so you will need to supply your own. Bad bits.. Unfortunately the carburettor will need replacing as I broke the original one when I took it apart to clean, I went to rebuild it and I broke the connector for the high speed needle. The carburettor on it currently is a traxxas body, with the losi parts as they looked very similar but I did have to modify it for the parts to fit, so although this carburettor does work the idle screw doesn’t and the only way to set idle is by trimming the throttle which is not ideal. So I will give no guarantee with the carburettor and hence why I’ve listed it as ARTR ( Almost ready to run). Engine otherwise runs and is in good overall condition and I can and will test it before I post it out. The carburettor you will need is a 13mm body/neck that connects to the engine. You could use one from a traxxas 2.5 or 3.3 engine or you could get a os11 which are highly rated and abit pricey or any half decent carb will do and you will have a well sorted rc. Needs new air filter. Now for some more good news.. Comes with a whole load of spares including another chassis which is a thicker one then the original one, spare arms front and rear, all the turn buckles, hinge pins, steering bell cranks and front chassis plate, shock tower parts, rear hubs, spare drive shafts with 12mm hexes as the original wheels are pin designs, so now you have the option of running hexes at the back. A spare gearbox casing with all the bearing and shafts, and I put the two stripped gears in that gearbox so you have an idea how it’s built if you ever need to service the gearbox on the Losi or need spares like bearings and shims or shafts or whatever else, it has a diff which works fine but does have wear on the drive cups but again is usable or can be used if you even need to rebuild the diff. And a fair few others bits, nearly another complete chassis. Comes with some spare wheels two sets of front wheels and a spare wheel at the back. I will update the advert as I have probably forgot things but that is the jist of it. The rc overall is a beast and in excellent overall condition, apart from needing a new carburettor. Will be sent tracked insured and signed for and will be properly packed. No box or instructions. No buyers outside the UK. No returns due to nature of the hobby. Any questions please feel free to ask. £235 including fee’s and posted tracked insured and signed for. Cheaper collected and will include fuel. Thanks for looking.

Cool I’ll pm you.

Thanks guys I’ll most definitely be ordering from them. Cheers once again

Maverick strada / HSP/ himoto spares or a chassis for spares. Basically I’m building my own rc if ya like, majority of it will be maverick strada parts like diffs and pretty much most of the drive line, I’m putting in a slightly longer chassis. Anyways bits I need are as follows Motor mount, preferably the maverick one. Upper chassis brace. Centre drive shaft. Couple of dog bones for the MT monster truck version. Right front steering hub/ the bit where the bearings and drive cup goes. Pair of drive cups. Lastly the shaft with the gear on it that goes from the rear gearbox house into the motor mount. And a chassis would be a bonus just so i can get measurements from it. Basically if someone’s got a chassis with a few of thes bits that’s on its last legs would be considered. If anyone can help that would be great but wanted to see if I can source a couple of the bits needed before I buy new from eBay. Cheers.

Team Orion Vortex R8 ESC and Trackstar 2650kv motor for 1/8 scale. Team Orion Vortex R8 Esc. In excellent fully working condition. 130 amp. Loads of programmable functions. 2-4 s capable. Turnigy Trackstar 2650kv 6 pole brushless motor. In very good fully working condition. Absolute beast of a motor rated up to 4s. Few cosmetic marks but overall in good condition. Check out the YouTube videos on how the motor runs. Everything is fully working as it should. £85 postage and fee’s included.

Sold now please close. Please could a mod lock this thread. Thanks.

Bump £275 postage and fee’s included.

Bump Will include 2X Turnigy 3s 5000mah lipos.