Kev the Rev

Was the ESC jumper set to LI-Po ?

Hi . Has anyone got a surplus chassis tub , broken is fine and the rear arms and lower gearcase panel UK , buy or swap etc

Hi . I've got new vintage Frog parts . 2 x B6 and springs if you still need them ? cheers Kev (UK)

I do like a nice bit of 'Henry Cole' candy apple red though 😉

I'm looking for a drivers head / helmet UM59 / also known as Sid-9 from the Sprint car . Thanks

Heat up the threadlock and it will give , enabling you to tighten down whilst it is warm / hot

Enjoy the fun guys !!

You might need to take the servo out of the chassis to get the servo saver off , but that's ok . Unclip the rods end of of the steering arms near the wheels . Check the servo is centred as said before , set your steering trim to zero I believe is centre on that handset , Check that the servo saver moves equally left to right from the centre ( as in equal steering ) then reassemble the servo and saver and refit if all seems good

Post a pic of the servo / RX cable and which ESC you are using . Check the handset steering trim settings . You might have attached the servo saver to the steering servo before the servo was centred . Try unscrewing the servo saver from the servo , turn on the TX and ESC . The servo will centre itself , then re-attach the servo saver with wheels straight ahead . The plug for the steering servo may be backwards in the ESC - without pics - can't tell

The truck looks fun - get all the tyres on the right way though . Yes , entry level , but useable . You know you need to spend money when they come with no adjustable turnbuckles etc . I found with my SMT the metal seemed to be made of cheese 🐭

Do you have any pics of them ?. I have a Smartec Winner SMT 15 nitro 2 speed 4wd buggy and it is an entry level job . It looks great but the actual quality of the parts leaves a lot to be desired . They are good fun to run but don't fetch a lot of money when sold on . I would say run them if you can . Ansmann is possibly much the same

Smokin' - luv it !!

Hi TurnipJF :)

What was the issue in the end ?

Taking offers on the parts and truck . I am also including a Sanwa 27MHZ AM Handset with the truck - so all you need are batteries