Leaderboard

Although MSUKForum started a few years before, this version of the forum will turn 20 this November, crazy!

Worked on the UDR changed the spur gear to a 55t see if calms the truck down on 6s , it works a treat loads of torque plus it still rips if need be . Took it out for a test round a little track I make out of a path and a few tree's I try not to crash into 😅

More pics of ours, Thanks for looking

SCX24 with a dusting of Injora upgrades and some rock sliders a mate printed out for me.

It is to replace the servo you put in the og scx10 cheers for the replies guys will look in tho them

They've been fine. I've got a few sets, all really smooth apart from the first set I bought, they stick a little. I've had to use the stiffer springs on some of the hard body trucks. The tarantula and kangaroo sag down nicely with the softer springs.

I had that trouble with a servo saver for my mod Clod, steering was a mess, not even a strong Kimborough would work. Eventually grabbed the heavy duty GPM one and for £9 it does well. Not the finest out there but a good balance of cheap/good/etc

Looks like you had fun playing with err testing them

bad description White van make who throws food at people better description Retail Delivery.... Not a glamorous job, but I kept the nation Fed through the Pre pandemic + Pandemic + Post Pandemic Trained Mechanic but couldn't get a job due to my age 😞

Oooh sunshine, couldn’t resist having another play, sorry, test the progress on the course. Even managed a little “camping” trip…lmao. Topless shot!! That’s all for now. i will add though, dont like to toot ones own bugle but the Defender is a changed truck now, it goes where you point it (apart from the front bumper but that has to stay.) the Chevy drives much better although i honestly think that the motor is struggling a touch compared to the Defender both have identical gearing (the bigger tyres on the Chevy is about all the difference i can find….. cheers.

Some new marine grease, I wanted try a new type for the trucks as the old stuff is running low and it's blue!! 😃

Yeah they all work as long as they got same connection as ESC. I use traxxas / gensace / turnigy lipos no problems at all with traxxas & hobbywing set ups. I am slowly swapping over the traxxas connecters I have added to XT90 as I find they fit really well and don't come loose.

usually it is me 🤣🤣🤣

Like a bad smell 🤣🤣🤣

Thinking about getting a set in 2.2 for one of my other crawlers Know what you mean about the injora buggy, its fast becoming my go to crawler

Dont know if i have answered this on here before, i work as a vehicle technician for Jaguar Land Rover through the dealer network

Thanks @Stormbringer I also got the new floor primered and messed around in GIMP on the laptop and then used a poster splitter print it out so I could mess around with wall styles.

Definitely, Proline ibex are 70 odd quid a set! They do them in 2.2, so I've ordered a set to try on the rhino.

Gonna look great

GL on a big lotto win mate

Hello mate, welcome back to the forum

Fitted a SSD rear diamond and changed the wheels and tyres. I've got the diamond front but I'm not sure if the servo mount will fit.

Fitted a SSD rear diamond axle and changed the wheels and tyres.

After watching some youtube videos I had an attempt at painting concrete the other week on a spare bit of plywood. I thought it might be more interesting than a flat grey floor. Can't decide if I'm going to try and do it again on the actual floor. It was an interesting experiment though.

Cheers! it's based on an old mountain bike team 'Yo Eddy' I lusted after as a teen 😁 Took er oot for a spin today an to get some shots in the sun. Lasted 5 mins till the spur went bald! So next mision is to fit the cheapy chinese metal one I got 🤞

Done a few bits to the k10. It really struggled crawling with the stock gearing so 32% underdrive gears and aluminium gearbox. Swapped the chassis over to the injora lcg chassis. It's sitting a little lower. I'm probably going to have to go to a smaller tyre size to lower it further. I'm not keen on chopping the body on this one, well just yet anyway. Shocks tuning next.

Built the injora kangaroo chassis back up. This is a very capable little crawler.

To be honest, it's really good

The servo saver arrived, it’s rubbish, sloppy on the servo splines and the spring is well too soft, it’s either 100% locked or flaps around in the wind 😂

Sad times are with my family, my daughters snow white cat Albie is to be put to sleep on Monday, we are so upset, he is 11 years old so not that old but he has just stopped eating and is losing weight, vet says its a cancer