steephill Posted June 26, 2024 Share Posted June 26, 2024 @Lone-wolf I'm sure you'll be impressed when you take it out. I think it's a good looking mini lcg rig👍 It's not just you who struggles with the little body clips. I do too. Injora do magnetic mounts for scx24 and a few other mini crawlers, I might look into seeing if any could work on the Utah. I hate those little bloody clips. 1 1 Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted June 26, 2024 Author Share Posted June 26, 2024 7 hours ago, steephill said: @Lone-wolf I'm sure you'll be impressed when you take it out. I think it's a good looking mini lcg rig👍 It's not just you who struggles with the little body clips. I do too. Injora do magnetic mounts for scx24 and a few other mini crawlers, I might look into seeing if any could work on the Utah. I hate those little bloody clips. I have ordered magnets to make some mounts but im now feeling they might be to strong, may rethink what im gonna use but the clips have to go 2 Quote Link to comment Share on other sites More sharing options...
steephill Posted June 26, 2024 Share Posted June 26, 2024 1 hour ago, Lone-wolf said: I have ordered magnets to make some mounts but im now feeling they might be to strong, may rethink what im gonna use but the clips have to go I've got some for 1/10 stuff but it's too big. Same plan as me then, the clips must go 👍 1 1 Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted June 28, 2024 Author Share Posted June 28, 2024 On 26/06/2024 at 18:03, steephill said: I've got some for 1/10 stuff but it's too big. Same plan as me then, the clips must go 👍 Fingers crossed this is gonna work, 10x3 round magnets with 3mm hole, had to slim down the body posts slightly as they are 3.5mm magnets tight fit but super glued in place and round magnets glued to inside of shell with epoxy, however the epoxy played up with screen print, but will be getting a new shell so this is a trial and error......bye bye fiddley clips 3 Quote Link to comment Share on other sites More sharing options...
steephill Posted June 28, 2024 Share Posted June 28, 2024 Good work @Lone-wolf👍. I tried using epoxy for magnets on a hard body. My favourite method at the moment is hot glue gun, works a treat and drys in seconds. I need to get some little magnets, I hate those little clips. 1 1 Quote Link to comment Share on other sites More sharing options...
steephill Posted June 28, 2024 Share Posted June 28, 2024 @Lone-wolf How do you like the furitek brushless system? Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted June 29, 2024 Author Share Posted June 29, 2024 7 hours ago, steephill said: @Lone-wolf How do you like the furitek brushless system? i have not run the truck yet so cant really comment, planning a run tomorrow Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted June 30, 2024 Author Share Posted June 30, 2024 quick run with the FTX Utah, a bit Hmm, did not seem to do as well as i expected, lack of grip and likes to roll over 2 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted June 30, 2024 Share Posted June 30, 2024 I just realised how big those wheels and tyres are maybe smaller tyres might improve the not tipping over ? The tyres wont be scrubbed in yet tho but at end of video it did make it up that slab of rock 1 Quote Link to comment Share on other sites More sharing options...
steephill Posted June 30, 2024 Share Posted June 30, 2024 @Lone-wolf Mine wasn't great out the box, but I'm comparing it to my modded Trx4m’s. I did a test run with stock wheels and tyres and then tried steelies with brass rings and 64mm hyrax copies, huge improvement. I'm currently testing 1" brass wheels with injora swamp claws. I'm going to test 1.3s after that. I've also added droop springs to stock shocks to keep the ride height down. 2 Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted July 1, 2024 Author Share Posted July 1, 2024 I have ordered a set of injora black Brass 1.0 wheels, retty heavy ones and some injora 62x22mm tyres, hopefully it will improve it, if not might add some resale value to it 1 Quote Link to comment Share on other sites More sharing options...
steephill Posted July 2, 2024 Share Posted July 2, 2024 @Lone-wolf A cheap V2 plastic rear axle so you can flip the rear diff and use the reverse rotation on the gearbox to help with torque twist. Cost about 2 and half quid from asiatees. 2 Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted July 2, 2024 Author Share Posted July 2, 2024 Slightly of topic but looks like the new Hobby plus 6x6 flatbed truck is getting closer to being released, im really hoping for 2 speed trans, all metal gear set oil dampers and pretty sure it has the portal axles 3 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted July 2, 2024 Share Posted July 2, 2024 it does look pretty good tho 1 Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted July 3, 2024 Author Share Posted July 3, 2024 all change for the FTX Utah, a new body arrived today, somehow i kinda got it done in record time, just got to wait for paint to fully dry then glue the magnets, its not perfect but it was never gonna be a show body, its to be used 2 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted July 3, 2024 Share Posted July 3, 2024 hmmm camo style 1 Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted July 4, 2024 Author Share Posted July 4, 2024 21 hours ago, Stormbringer said: hmmm camo style I think it needs a few sponsor stickers on it 2 Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted July 6, 2024 Author Share Posted July 6, 2024 New brass wheels and sticky tyres from Injora less than a week from China to UK each wheel and tyre weighs 59g, pretty heavy, i will need to be careful i dont start breaking prop shafts 3 Quote Link to comment Share on other sites More sharing options...
steephill Posted July 6, 2024 Share Posted July 6, 2024 @Lone-wolfNice wheels mate👍 I have a similar set on my Utah, they made a big difference. 2 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted July 6, 2024 Share Posted July 6, 2024 Nice wheels mate i have a couple of sets of those in my spares as was going to use em on the Atlas but didnt 1 Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted July 7, 2024 Author Share Posted July 7, 2024 Quick run this morning, a lot better but i am ditching the S7 galaxy phone 2 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted July 7, 2024 Share Posted July 7, 2024 Did seem to go a lot better and it does have a fair turn of speed as well 1 Quote Link to comment Share on other sites More sharing options...
wombat Posted July 7, 2024 Share Posted July 7, 2024 Looking good, is the body from ftx or an aftermarket one ? Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted July 7, 2024 Author Share Posted July 7, 2024 9 minutes ago, wombat said: Looking good, is the body from ftx or an aftermarket one ? Its listed as the FTX but its a CR-18p Evo pro 1 Quote Link to comment Share on other sites More sharing options...
wombat Posted July 7, 2024 Share Posted July 7, 2024 Thanks for that, I can really see me getting one in the future, and would want to put my own painted body on one 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.