bradderz Posted December 9, 2011 Share Posted December 9, 2011 sounds like everyones having a ball with their rc's! i didnt run anything today as the truggy has been primed and readied for the next NLB bash, i did however strip me new TC down for the very first time if u can count me buying a new RC then thats what i also did Quote Link to comment Share on other sites More sharing options...
cyronn Posted December 9, 2011 Share Posted December 9, 2011 I did try and run my old man's b4.1 in common with some old bike jumps but was to heavy with the leaves everywhere and running 3S I think is slight overkill for the stock setup and block rear tyres that did not help one bit. Quote Link to comment Share on other sites More sharing options...
.AJ. Posted December 10, 2011 Share Posted December 10, 2011 Fitted a HN CRT.5 wing to Hyper TT and took a hammer to some bent CVs 1 Quote Link to comment Share on other sites More sharing options...
willashcroft Posted December 10, 2011 Share Posted December 10, 2011 Blew the dust off my Drifter. Quote Link to comment Share on other sites More sharing options...
goldblades7 Posted December 10, 2011 Share Posted December 10, 2011 likin the hammer style Quote Link to comment Share on other sites More sharing options...
Dirty Electro Posted December 10, 2011 Share Posted December 10, 2011 Finished the MG-T gearbox. MGT 8.0 gearbox casing and gears (steel), FOC conversion, Ceramic bearings, Gorilla Snawt grease and locked 2nd gear. Diffs front and rear next Quote Link to comment Share on other sites More sharing options...
graxon2001 Posted December 10, 2011 Share Posted December 10, 2011 Blew the dust off my Drifter. With a big drift, I hope Quote Link to comment Share on other sites More sharing options...
martin Posted December 10, 2011 Share Posted December 10, 2011 Got soaked and thrashed the living daylights out of the hyper got it minging, went home took engine out re oiled clutch bell bearings and slapped the engine back in ready for a nother hard bash today, might clean it sunday, don't clean it that much in winter as it gets dirty to quick and all the hard work is wasted imo, just get the thickest off with air compressor. Quote Link to comment Share on other sites More sharing options...
heavyleftthumb Posted December 10, 2011 Share Posted December 10, 2011 didnt get chance to touch the rc's Quote Link to comment Share on other sites More sharing options...
theoriginalbasher Posted December 10, 2011 Share Posted December 10, 2011 Pushing my MT2 around making Brum Brum noises Quote Link to comment Share on other sites More sharing options...
Dave'n'Claire Posted December 10, 2011 Share Posted December 10, 2011 Started stripping down the 'hanging' hyper 21 i have just got off a work mate. Been well used but got some nice bits and new 2.4 radio. The wife thought it was Quote Link to comment Share on other sites More sharing options...
barnetbasher Posted December 10, 2011 Share Posted December 10, 2011 Pushing my MT2 around making Brum Brum noises vid please ! Quote Link to comment Share on other sites More sharing options...
Richard.S Posted December 10, 2011 Share Posted December 10, 2011 Fitted the anti sway bar kit to my savage - about to go out and see if can make it round a corner without rolling it. Quote Link to comment Share on other sites More sharing options...
DreXeL Posted December 10, 2011 Share Posted December 10, 2011 Finished putting the Muggy shocks on my Son's LSP, also fitted a new UJ driveshaft to it, then took it and my Muggy out for a thrash. Quote Link to comment Share on other sites More sharing options...
Nitroholic Posted December 10, 2011 Share Posted December 10, 2011 Took the Savvy out for a thrash and the new spur gear is officially GOOD. The hard ground with wet grass had zero grip, but I had a laugh drifting the beast Then the one-way bearing failed. Refuelled, hit the starter and it just span the gears and didn;t turn over the motor. Take out the glowplug and it turns. Will have to give it a clean and see if that helps. Otherwise...I think I do have a spare. Least I got a couple of tanks through the thing without melting a spur! Hooray for metal spur gears..... Quote Link to comment Share on other sites More sharing options...
itsme93 Posted December 10, 2011 Share Posted December 10, 2011 (edited) Took the Savvy out for a thrash and the new spur gear is officially GOOD. The hard ground with wet grass had zero grip, but I had a laugh drifting the beast Then the one-way bearing failed. Refuelled, hit the starter and it just span the gears and didn;t turn over the motor. Take out the glowplug and it turns. Will have to give it a clean and see if that helps. Otherwise...I think I do have a spare. Least I got a couple of tanks through the thing without melting a spur! Hooray for metal spur gears..... Hi nitro I hope you put on a heavy duty clutch bell on aswell with that metal spur gear as the metal spur will chew it to pieces as on the plastic one it will go well before the clutch bell but that metal one will destroy it and also a word of warning have that slipper a little bit looser as if you land wrong the metal spur will eat the gearbox gears like mine did lol remember the plastic spur gear breaking is a failsafe for your gearbox gears Edited December 10, 2011 by itsme93 Quote Link to comment Share on other sites More sharing options...
NOFX Posted December 10, 2011 Share Posted December 10, 2011 Hi.I fitted a new hub thing from the maxx on my MMM'd summit,cause I've not got the bearing that fits the original . Got the truck into the back garden,the x pin in nthe driveshaft broke.So I made a couple of new bits ,Then beat the crap out of it cause it'd annoyed me Quote Link to comment Share on other sites More sharing options...
stretch Posted December 10, 2011 Author Share Posted December 10, 2011 Ran the stampede for about 30 seconds then noticed burning smell from the slipper area so am now stripping it down to see what the problem is. Quote Link to comment Share on other sites More sharing options...
Jack R8 Posted December 10, 2011 Share Posted December 10, 2011 After toiling for half an hour had a quick run with my hyper and decided i really want it to be brushless! kept stalling when i opened it up the throttle cba tuning it and its dark! 1 Quote Link to comment Share on other sites More sharing options...
Thunderwolf Posted December 10, 2011 Share Posted December 10, 2011 i kicked it in rage Quote Link to comment Share on other sites More sharing options...
Baronie Posted December 10, 2011 Share Posted December 10, 2011 Pushing my MT2 around making Brum Brum noises LOL Changed shock/diff oils on my Inferno Ve Quote Link to comment Share on other sites More sharing options...
bulletflux 345 Posted December 10, 2011 Share Posted December 10, 2011 bashed the crap out of it Quote Link to comment Share on other sites More sharing options...
danny boy Posted December 10, 2011 Share Posted December 10, 2011 Mods today Ansmann Mad Monkey- fitted new huge rear wing, added titanium turnbuckles, fitted cut stagger ribs up front and fitted mini spikes on the back Thunder tiger phoenix- bothered to put it back together 1 Quote Link to comment Share on other sites More sharing options...
RoughRiderBX Posted December 10, 2011 Share Posted December 10, 2011 Tried to start my baja, still won't do it, just the odd cough :/ Quote Link to comment Share on other sites More sharing options...
Juggernaut jims Posted December 10, 2011 Share Posted December 10, 2011 Would of liked to replace all the bearing on the models but ran out of time again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.