diago999

Please check eBay listing https://www.ebay.co.uk/itm/203529769581?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338273189&customid=&toolid=10001&pub=5575378759&icep_ff3=1&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg

I have an orion r10.1 on ebay at the moment man https://www.ebay.co.uk/itm/Orion-R10-1/202799167418

Hi all, Money burning a hole in my pocket; looking for a tekno sct410.3 I have bodyshell and electrics but if you've got one rtr I'd probably still take it. Paypal waiting. Cheers!

Sold! Hi all, For Sale I have an ABSIMA CR4T transmitter, 4 channel telemetry Receiver and Spare Waterproof 3Ch Receiver. As per the kit it includes the voltage, temperature and speed telemetry modules with all the wires, (one of the wires does have a tiny knick in it, but works fine). I will include the set of Absima rechargeable batteries too. Transmitter is also convertible to left handed (that's how I drove). Also works with VRC Pro with a micro USB cable (also included but not pictured). Also included if the buyer wants it is a spare transmitter handset, (Absima replaced it as it as one of the trim buttons broke, so would be ideal for spares) Selling as I changed to Spektrum, Looking for

Its so the motor fits the brushed vantage uses a 550 size can and the brushless a 540, its so you can accommodate the 550 size can

Yeah he's a member Thing is even with an alloy or steel spur gear, you'll still get bits of sand in there, and unless your running the same strength pinion and spur you will always risk ruining one, If you were into modding you could try and fit a baloon or something around the mesh to stop this happening?

I think the link is a few pages back, a guy (sorry cant remember his name) posted up some 74t and some 64t ones,

http://www.modelsport.co.uk/ftx-65t-spur-gear-vantage-carnage-banzai-hooligan/rc-car-products/365809

No worries, you could always cut down the originals if you were handy

Hi mikeald. If you are worried about the nut falling off you can get nuts which are more low profile and flanged to hold onto the rim better (such as the xray xb4 wheel nuts) but if you are looking for abit of added saftey I'd use some threadlock on the rear wheels

If you dont mine me asking how was it better without the sensor cable? did it just judder less? and let us know how you got on with racing it. I've pretty much changed mine into a drift pig because I run an xray xb4

Hi Devin, That "cogging" usually happens when you are running a sensorless setup (sorry if you already knew this!), when you said it makes no difference if you take the sensor cable out it tells me that either your esc sensor port, the cable or the motor sensor board is feked. (which probably is a quality control issue with leopard gear, I stay away from it now and just get proper branded esc's and motors) My Brushless RTR did this after I changed to a leopard esc and motor and it was naff, I changed cars after this as it wasnt a club level racer sadly. Also have you managed to break any of the rtr wheels yet? I think I've broken 2 or 3, so if you are racing on high grip astro might be worth investing in some of the solid disk wheels from hobbyking as they are dirt cheap. Cheers Tristan

Seconded on the praise they look great, also 42 views already??! nice work sir.

Have a look at the Quanum Vandal rear wings, (from hobbyking) if your willing to wait its like

Hey jari, tried ping you about the used pinions but the message won't go through could you message me? Cheers Tristan