realybigdave

bump

alright bud no worries will amend it now

open to offeres buddy

shoot me an offer pal??

sorted pal

https://www.facebook.com/groups/1428877840699984/permalink/1717491431838622/?sale_post_id=1717491431838622&comment_id=1717887598465672&reply_comment_id=1717889611798804&notif_t=group_comment_reply&notif_id=1464534827035921 £250 or offer List of spares. 3 wheels and tyres from the black edition tyres in good nick i will try to find the fourth one and include it. 2X exhausts 1from the lrp.28 sport engine on the rtr, 1 original hobao exhaust that came of a mac.28 1X original receiver box with two lids one has a switch in it that works to my knowledge. 1X fuel tank with no leaks to my knowledge, fuel pump/filter,and the mounting bracket for the filter and one purple mount. 1X hpi k4.6 engine with good compression ran great when it last ran (comes with a spare carb from a hobao mac.28, needs backplate/pullstart/glow plug/clutch bell/airfilter to my knowledge. 1X savox sw-0231mg servo, one of the internal gears are stripped. 2X bulkheads? one is an original and one is a purple aluminum one. 2Xshock towers (rear) original spec 2x radio trays (original spec) with 3 purple mounts 1X glow starter did work but has been stored for several months 1X imax b6 lipo charger has a button missing but can be pressed with an allen key apart from that it is fully operational. The cars. ROLLER (Original hyper 7 .21) mostly original spec missing a few parts as can be seen in the pics has a carbon fiber bulkhead and purple chassis mounts. Also has an uprated st front shock tower and a cnc rear shock tower, the shell is in semi decent condition. RTR (Hyper 7 pbs) (full diff oil change think im running 5k-7k-3k+full shock oil change cant remember weights 10 ish tanks ago) This thing was my pride and joy for a long while and has had a pretty penny spent on it. List of parts on this little tank. Hong-nor big bore threaded shocks lrp.28 sport engine (had about 15 tanks through) and is also fully sealed. Carbon fiber front and rear shock towers Purple bulkhead Purple chassis supports Purple wing mounts Carbon fiber center diff plate tq2 radio box 6v hump pack savox sc-1256tg steering servo savox sw-0231 throttle servo carbon fiber radio tray+purple mounts. shell is a bit tatty* flysky fs-gt3b transmitter and receiver I am looking to sell everything ive got as i no longer have much interest in the hobby the rtr one can be seen running by all means however fuel-ignitor-and battery's for the handset will need to be provided by the buyer. I am open to offers on the whole lot pick up only from ollerton full details provided upon request. Pics on Facebook...

Looking for a decent hpi baja 5b im on a restricted budget so trying to get a grasp of prices let me know what u got

Looking for a savox ac1258tg let me know what you have got

just been for a quick run with my hyper and have experienced my first "runaway" due to my throttle servo getting stuck on full throttle i was able to steer it so managed to stop it with my foot--- may not have been the best thing to do pmsl. anyways i got it back inside and was looking at all the electronics the battery has full charge the steering servo still oporates as normal but the throttle sevo seems to not move at all and doesnt respond to any input but makes a loud buzzing noise and i can turn the horn with my fingers with no resistance from the sevo i think it may be just the motor but i am unsure any advice appreciated

well I hope so its been sitting the wrench for a while now just incase I will go to the modelshop and pick one up thanks for the suggestion

glowplug seems fine too me glows good

will go to Halfords for sealant 2moz

I put it all back together and it seemed to be nice and tight still has the same compression idle still could be a bit small I guess... I will strike her up 2moz and see how it goes I just don't see how for half a tank it can run fine?? anyways I have just stripped and cleaned the carb and as soon as I got the engine I sealed the carb and backplate but they no longer are as I have no sealant I will just see how it goes 2moz and take it from there it should just be something simple but I can get how it can just cut out even while revving more than idle and then starting back up when I do it and do the same.. I will figure it out

just been for a bash with my nitro and was doing some jumps on a bmx track and when I brought the car back in to refule I found the airfilter had come off. After I got home I totally rebuilt and cleaned the engine and made a fairly half arsed effort to clean the carb I must admit simply pouring fuel through the intake side while moveing the slide.. put it back together started right up and ran great for about half a tank and then it just stalled for no reason.. attempted a few more times still cuts out seems to be after a few seconds of idle or after I apply small amounts of throttle I think I have to fully tear down the carb and clean it to fix my issue but im just wondering if anyone has run into this problem and could give me some advice?

just took it apart looked at the pinion and it was a but tired very tired so I just swapped it and now its all sorted thanks very much for the input nothing like fixing up an rc at all hours in the morning lol