mattmussett

Have PM'ed you bud.

Hmm, not sure why that is. Have PM'ed you, hopefully that will work!

1717 price reduced, pics added, body shells added, sold items deleted

Now the Savage has gone to its new home I have no need for the following. All were fitted to the truck, tested on one run and then shelved, so all items in near perfect condition: Castle 1717 bought new from the US, taken from new XO1, 1650kv - SOLD HPI alloy diff cases (x2), 2 sets of diff gaskets and 1 x set of diff screws (NIP) - £20 posted Edit RC chassis braces - £15 posted RPM skid plate for standard Flux (NIP) - £10 posted Ford F150 Raptor bodyshell for standard length Savage (extra hole in rear as had FPV gear fitted) - SOLD HPI Gigante XL Flux shell - used once, a little paint scraped off at rear - SOLD If using paypal please add the fee's. Any questions please feel free to ask.

HI. Its not standard, it is fitted with "standard length" Alza TVP;s, bulk head conversion, Integy rear hubs, sway bar kit, Hot Racing Hexes, sorry if my ad has confused you, I will amend it to make it clearer! Cheers

For Sale - Savage Flux I bought this at the end of 2014 as I had a hankering to build a super Savage! This I did, but since completing it the truck has sat on the shelf, so it is time to pass it on. It was used a couple of times in standard form, then it was rebuilt as a modified standard length truck and was only tested for ten minutes with FPV gear. It was then stripped and rebuilt into a full fat XL, and again was used once at a pedestrian pace, so it is barely used! It has now been returned to upgraded standard length, and comes with the following upgrades: Alza racing 5mm TVP's Alza Racing bulkhead brace conversion Alza Racing top braces Integy rear hubs / tie rod deletes TCS crawlers threaded hinge pins for rear hubs HPI sway bar kit front and rear Hot Racing hubs with proper 17mm hexes This is the latest spec Flux with the waterproof ESC (re-branded Castle monster Mamba 2) and the better locking battery boxes. It has been refitted with the standard Flux 2200kv motor and transmission and stock shocks. Comes RTR with the original HPI radio gear, manual, all stock items replaced with upgrades, new in packet RPM skid plate, original box and other bits and bobs that came with it. The car really is in near new condition, with only minor scratches on the skid plates and shell. Looking for SOLD will post for £15. If collected I will through in a couple of lipo's to get you going (they are well used and taped up, but they work!). Can be collected from Billingshurst or Shoreham, West Sussex. Thanks for looking and please PM me if you have any questions.

Or, to make things simple, you could just sell me the 600mw tx! What do you want for it?

Hi All, Here I have for sale a brand new Kyosho MP9E TKi Race Roller (full spec, not RTR!) Bought to try this season, built it, fitted electrics but then got sponsored to run for Tekno, so it has sat idle since! Not even been set up. Comes with all parts left over from the build, instructions, original box, sticker sheet, plus a few sets of used Kyosho springs (not pictured), including orange rears for wet or bumpy tracks. Also fitted with DE Racing rear skid (2 spares included) and front skid / bumper. Really nice piece of kit and is a shame to sell it, but no point in me sitting looking at it, so my loss is your gain! Obviously it is in new condition and comes as a roller (no electrics, no wheels or tyres, no radio gear, no batteries).

If you split can you put me first in line for the TVP's, skid plate and braces and the servo with horn. Money waiting Cheers

Receivers sold.

Id say sub

SOLD, PLEASE CLOSE

Hi guys, Having a bit of a clear out and have the following that are no longer required: Futaba 3GR 2.4ghz tx with 3 x FR-Sky mini receivers. Had this for a few years and it has never let me down, but time has come to upgrade and I already have a spare set. One receiver is new in packet the other two are used. One has the tip of one arial missing and the other has a lose case (bit of tape solves that!) but both work fine.

Hi guys For sale is my RC8.2e Factory Team roller. I bought this off of ebay last October to use in out winter series (which is run on the asphalt circuit), and it is now surplus to requirements. It is is a decent condition, but is used so expect a little slop and regular usage wear and tear. The shell is a little tatty but still very usable. It is missing the mount for the front of the battery tray however there is a fix in place that works just as well. The front body mount post is lose, and there is a split in a CV boot. The previous owner colour coded the ali parts in a Red and Black colour scheme, so all the parts which are usually Blue are now Red, and the rear shock bodies are Black, although it has had new front shocks which are in the regular colour. This obviously has no effect on the running of the car and the anodising has been done to a good standard. Other than Losi captured wheel nuts and Kyosho springs it is standard. I have fitted new diff internals in both the front and rear diffs and new front out drives (both have less than an hour running since installation). I also replaced broken front arm and both front hinge pins and it will come with the other spare arm. I have been as honest as I can be. It is a used car, so if you are looking for mint it is not the car for you, but other than the above items it is all together and drives well. Looking for

Your inbox is full mate