slenderRC Posted October 22, 2015 Share Posted October 22, 2015 what's the procedure for setting the above esc's lvc? Cant download the manual online as it needs a app to open it and my terrible phone will not let me download apps!. Thanks! Quote Link to comment Share on other sites More sharing options...
Noj Posted October 22, 2015 Share Posted October 22, 2015 Use the program box, simples!Plug main ESC lead into program box (either the old, red led style or the new, usb link version) and power up, box will light up, set parameters, save changes, job done Quote Link to comment Share on other sites More sharing options...
slenderRC Posted October 22, 2015 Author Share Posted October 22, 2015 that would be great but I don't have a program box at the moment, just need to know how to do it using the set button on the esc for now. Thanks Quote Link to comment Share on other sites More sharing options...
Noj Posted October 22, 2015 Share Posted October 22, 2015 Hold set button when switching ESC on, red LED flashes.Continue to hold the set key (3 seconds) green LED flashes 3 times, release the set button. You are now in programming mode for value 3 (lvc). Red LED should be flashing three times, press the set button again until the red LED flashes 6 times, for a 3.4v cut off. Finish programming, switch ESC off and then on, parameter should be set.That comes straight from an xerun 150a manual, so pleasse don't blame the writer if it doesn't work.This is why the program box is a must have Quote Link to comment Share on other sites More sharing options...
Nitroholic Posted October 22, 2015 Share Posted October 22, 2015 Turn off ESC, transmitter etc. Turn on transmitterhold set key and turn on ESCRED LIGHT FLASHESgreen LED flash once....forward reverse.hold set key for 3 secsgreen LED flash twice .... drag brakehold set for 3 secondsgreen LED flash 3 times ....LVC,Release set keyfor actual settings.... 1 red flash = none, 2 red flash = 2.6V, 3 = 2.8V, 4 = 3.0V, 5 = 3.2V, 6 = 3.4Vpress set key to advance the settings. Quote Link to comment Share on other sites More sharing options...
everclear1984 Posted October 22, 2015 Share Posted October 22, 2015 (edited) Sounds like it's the same as the WP-SC8. If so then here's some screenshots from the programme section of the manual. Edited October 22, 2015 by everclear1984 Quote Link to comment Share on other sites More sharing options...
Noj Posted October 22, 2015 Share Posted October 22, 2015 People who know how to use technology are awesome! Cheers EC 1 Quote Link to comment Share on other sites More sharing options...
evssv Posted October 22, 2015 Share Posted October 22, 2015 jus buy a prog box.....so much easyer! ! Quote Link to comment Share on other sites More sharing options...
slenderRC Posted October 30, 2015 Author Share Posted October 30, 2015 Aint been on here in a while, so I'm not just ignorant guys lol! Thanks for the help all done now Quote Link to comment Share on other sites More sharing options...
evssv Posted October 30, 2015 Share Posted October 30, 2015 (edited) so what's it set at?, and what r ur lipos coming off at? ? Edited October 30, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
slenderRC Posted October 30, 2015 Author Share Posted October 30, 2015 set it to 3.4v checked it and it come of at 3.3 so that's ok Quote Link to comment Share on other sites More sharing options...
evssv Posted October 30, 2015 Share Posted October 30, 2015 (edited) Not bad. ..I gota re chk my hobwing esc's as I thk I can lower them all and get a bit extra out me lipos ...without dropping to low under storage charge. . . Edited October 30, 2015 by evssv 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.