benmay Posted March 31, 2015 Share Posted March 31, 2015 hi there, i wondered if you could help me. i have an electric truck 1/10 scale and am very new to this game. i need to get it fixed but need some advice. would you be able to help me? i am willing to pay if needed? thanks Ben Quote Link to comment Share on other sites More sharing options...
Alex97 Posted March 31, 2015 Share Posted March 31, 2015 What truck is it? If you say what's wrong and maybe post a picture we'll be able to help. Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted March 31, 2015 Share Posted March 31, 2015 No payment is necessary, don't be silly, the Forum is here for exactly these situations. As Alex said, let us know the problem in more detail with perhaps a picture or two and someone will know what you need Quote Link to comment Share on other sites More sharing options...
benmay Posted March 31, 2015 Author Share Posted March 31, 2015 its a ACME VILLAIN A2008T. the front left steering tie toad with ball mounting is quite lose and the car does not seem to turn correctly. is this normal? also the central shaft does not appear to be turning as much as it should. as you can tell i am VERY new to this game so any help much appreciated. thanks Quote Link to comment Share on other sites More sharing options...
epons300 Posted March 31, 2015 Share Posted March 31, 2015 Post your area mate . Someone close may help Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted March 31, 2015 Share Posted March 31, 2015 Wear in ball joints is normal and a part of the hobby. If the servo isn't turning correctly, check the teeth aren't stripped in the horn. Or check elsewhere for anything that could be causing it. I had a similar problem the other day, my Gelande ll just stopped turning left, I picked it up and noticed a stone in the drive cup, took it out and it worked perfect again Quote Link to comment Share on other sites More sharing options...
Theodore Bagwell Posted April 1, 2015 Share Posted April 1, 2015 Wear in ball joints is normal and a part of the hobby. If the servo isn't turning correctly, check the teeth aren't stripped in the horn. Or check elsewhere for anything that could be causing it. I had a similar problem the other day, my Gelande ll just stopped turning left, I picked it up and noticed a stone in the drive cup, took it out and it worked perfect again That will be Quote Link to comment Share on other sites More sharing options...
everclear1984 Posted April 1, 2015 Share Posted April 1, 2015 Wear in ball joints is normal and a part of the hobby. If the servo isn't turning correctly, check the teeth aren't stripped in the horn. Or check elsewhere for anything that could be causing it. I had a similar problem the other day, my Gelande ll just stopped turning left, I picked it up and noticed a stone in the drive cup, took it out and it worked perfect again I had a similar problem on the Firestorm, a bit of gravel was jamming the servo when turning left. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.