Jump to content
  • Join our community

    Sign-up for free and join our friendly community to chat and share all things R/C!

Bought an Ess One


NuttyProfessor

Recommended Posts

You can bypass it I think via a 3rd channel if it gets annoying. Just hoping in the near future that you can add your own sounds, not just use the standard or ones you have to buy. I want my Vaterra to sound like I'm feeding a squirrel through a turbo :D

Only downfall that I see is the loudness, higher the voltage, louder it gets so running on 2s might not be loud enough for some users.

I've converted ipod amps to run in my rc's before with an mp3 player for tunes, I've never seen a sound box that could follow the trigger so its a marvel to me. Think you can also do horn sounds too with it, which is nice. The Godfather, enough said :D

Edited by NuttyProfessor
Link to comment
Share on other sites

Annoying as hell, sound weak and awful as the speaker box isn't big enough for good resonance. Some kids were running them at a drift night I attended last week, got very tedious after a few mins.

Best application I have heard one in is a 'v8' LB, which for comedy was bob on and the chassis makes for a good resonance box too.

Link to comment
Share on other sites

Can always build a custom resonance chamber inside the bodyshell to produce bass or port the Ess One box with a few little holes. 30w amp though. I just want it for a novelty really. Thing is with using one for drift, your not using the shifting gears sounds like you would on a speed run so its all rev limiter and waste gate for effect so would get annoying especially if its a crap sound too.

Link to comment
Share on other sites

Update on the ESS, was distorting on full volume, put my finger over the bass port and it cleaned the sound up so I whipped it apart and wedged some hard foam in the port inside. While I had it apart, I checked the speaker, they lied on the specs, supposed to be a 10w driver, its actually a 4 ohm 5w driver..........bar stewards! More powerful driver on the cards for me then!

Link to comment
Share on other sites

I've done a vid on my facebook page, name is Luigi Macari :)

Did find I had to crank up the turbo sound to 200% to hear it over the engine burble. Once I get a more powerful driver, I can run a higher voltage allowing more volume seeing as the box is only limited by the voltage you put in upto 6s.

  • Like 1
Link to comment
Share on other sites

Update

Running it on a separate mini 3s pack for a bit of extra volume and wedged the bassport with foam then taped it, also glued the driver in, was a bit loose. Also flipped the + and - on the speaker to flip the phase. Sound is a lot cleaner with less distortion so sounds more controlled. Still needs a higher wattage driver, its a 40mm driver by the way ;)

Link to comment
Share on other sites

  • 2 weeks later...

Only busted a front diff housing and a bodypost. Seriously strong chassis. I bought spares when I bought the car just incase. Only metal parts I'm using are the ally prop and cups plus the H

Edited by NuttyProfessor
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...