gouldypg Posted January 26, 2015 Share Posted January 26, 2015 (edited) has anyone got a spare one to sell Can't seem to find them in the uk, surly someone has a spare one from batteries brought from hobbyking, I can't find and for sale except international warehouse from HK These are the ones I'm talking about Cheers http://www.hobbyking.co.uk/hobbyking/store/__17225__HXT_4mm_Plug_Harness_for_2S_Hardcase_Saddle_pack_Lipoly_Batteries.html Edited January 26, 2015 by gouldypg Quote Link to comment Share on other sites More sharing options...
gouldypg Posted January 26, 2015 Author Share Posted January 26, 2015 Anyone? Quote Link to comment Share on other sites More sharing options...
dazp1976 Posted January 28, 2015 Share Posted January 28, 2015 Looks like you may have to make one bud Are all the bullets 4mm size or is one of them the smaller 2mm type because if they are all 4mm I can make you one up tomorrow from my box of bits with 12awg power + 22awg balance. Is the image below exactly how it all looks? http://www.hobbyking.co.uk/hobbyking/store/__16677__ZIPPY_Flightmax_5700mAh_2S3P_25C_saddle_pack_US_Warehouse_.html Quote Link to comment Share on other sites More sharing options...
gouldypg Posted January 28, 2015 Author Share Posted January 28, 2015 (edited) This is the one I need But it don't really matter about the balance lead, as I've already got 1 as you can see, so I can use this lead for when I charge them up I need 2 leads so I can run 2 x 2s in the sabretooth So if you could make us one without the balance lead that would be great Cheers and thank you very much Also the sabretooths esc has 2 of the 4mm cconnectors could you make a series connector so I could just use 1 4s These are the ones I'm is abouthttp://m.ebay.com/itm/231394867697?_mwBanner=1 If you could that would be brilliant Edited January 28, 2015 by gouldypg Quote Link to comment Share on other sites More sharing options...
dazp1976 Posted January 28, 2015 Share Posted January 28, 2015 Hi there. Just need you to double check something for me. If you are using 2x2s connected to get 4s then your esc is already wired in series like this one below correct? (Ignore the connectors obviously) http://www.rctech.net/forum/attachments/r-c-items-sale-trade/876236d1328889997-new-hpi-flux-blur-esc-hpi-blur1.jpg This means the Y cable will be of no use: If it looks like that above then you need a loop connected to 1 side of the esc and battery connected to the other for a single 4s brick like this http://www.maxamps.com/prodimages/Vorza_Deans_Adapter_medium.jpg Double check the esc wiring for me as I am confident that will be how the esc looks. If it does then a Y connector will make it fail. Also wouldn't a single battery put the truggy out of weight balance. Quote Link to comment Share on other sites More sharing options...
gouldypg Posted January 28, 2015 Author Share Posted January 28, 2015 (edited) Course I didn't even think, it's already in series Here a pic of my esc I was gonna move my electrics around like andythecrane has done, I'm not sure yet thou But if you could just make us up the 2s power lead that would be great, and leave the y connector for now If you don't mind that is Thanks a million Edited January 28, 2015 by gouldypg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.