Jump to content
  • Join our community

    Sign-up for free and join our friendly community to chat and share all things R/C!

What project are you working on?


tolska

Recommended Posts

What project are you currently working on or planning to do over winter?

I have two options to choose, the main and most interesting would be rebuilding a savage 21 which there seems to be a problem with the elextrics, the truck was also ran over by a car.... Not to bad for

Link to comment
Share on other sites

I need to build my LC Racing EMB-1 but i'm not allowed it until my birthday in a couple of weeks' time!

 

I then hope to enter it into a race or 2 over the winter ;)

Link to comment
Share on other sites

Sure right engine in truck? As 18 very small for it lol

Got couple going:

Mini z 02 brushless

Revo 2.5/3.3 e conversion to finalise

Ftx Punisher - rebuild ongoing

Schumacher fusion - started been on back burner for while now lol

Mardave marauder rebuild when ever lol

Losi 8 2.0eu it's fate undecided

Link to comment
Share on other sites

I plan to make my Tamiya TT02 into a drift full on fully hoped up drift car as well as make a old a Tamiya TB-02 in to a fully hoped up TB evo 3 racer :)

Sounds very interesting would live to see some pics of your project :)

Link to comment
Share on other sites

Sure right engine in truck? As 18 very small for it lolGot couple going:Mini z 02 brushlessRevo 2.5/3.3 e conversion to finaliseFtx Punisher - rebuild ongoingSchumacher fusion - started been on back burner for while now lolMardave marauder rebuild when ever lolLosi 8 2.0eu it's fate undecided

The .18 is in a condor pro, There's a .25 in the savage.

The revolution Sousa intersting.

Link to comment
Share on other sites

I've got a m05 waiting for me to get an alpine a110 body painted for. I think I'm dragging my feet on that though as I'd rather put it on an m06 chassis.

I need a few parts to finish a fire dragon that's currently sitting in bits in a bag.

Also got a mad cap roller that's going to become a saint dragon soon.

The cc01 unimog is an on going project, currently in need of a servo and something to fill the hole where I cut the brick off.

Unfortunately my budget for these projects has been cut down a lot due to all my bills going up recently so this could take some time. Doesn't help that I also have mountain bikes demanding their cut off my monthly spends.

Link to comment
Share on other sites

New wheels, tyres, body and winch for the scx10

Buy and build a second scx10 as a 6x6 winch rig

New motor in the STe

Rebuild the Hyper 7e from a box of bits and run a cheap leccy combo

New tyres on the 22

Total rebuild of the baja from chassis up, including new screws, engine, shocks, pipe, cage, brakes and body.

All of the above to be done in that order, though the two scx10 will probably happen simultaneously lol

Edited by Pistonhead
Link to comment
Share on other sites

too many!!! lol

 

Hyper ST brushless, finishing tonight.

Another Hyper ST brushless, not even started yet!!

Losi DBXL Brushless conversion, waiting on parts.

Baja 5B Brushless conversion, got most parts but not started yet,

And a Quaternium Spidex Pro Multirotor needing finished, hopefully tomorrow.

Link to comment
Share on other sites

Lunchbox (used) rebuild and fifth shock mod

Panther G to super detail and repaint

King Blackfoots x 2 to sort steering and add lights

Project 4wd Holiday Buggy

Brushless Losi 5ive to resuscitate

Vintage Tamiya Quattro to return to working order

Hilux cab to paint and refit to chassis

6 x TT01e/TT02 shelfer builds

There may be more, in addition to the general maintenance and rebuilds on the fleet ;)

  • Like 1
Link to comment
Share on other sites

Wrangler cc01 scale build been sat there since May awaiting my time to finish.

Lowrider pumpkin slammed on bigger rims with original ford tailgate not the blank rerelease one that had to go. Awaiting paint so again awaiting my time off work .

Low rider vw samba project awaiting me fitting esc .

M03 mini track car awaiting a thrashing once new boots fitted .

Tamiya Mann truck awaiting build still.

Tamiya / wedico tipper awaiting me welding up a new hydro tank old one leaks like a tramps shoes.

Many others boxed away or scatterd in the garage / workshop / shed

Mk 3 escort cabbie been sat in the garage for 12,yrs if not longer awaiting a spray job Then my little bro can take it away.

Fiesta mk5 to turn into a van for mrs to abuse for horse field dutys .

Link to comment
Share on other sites

i have 2 projects to do over winter.   

 

convert the mi4 to run 6mm belts on front and rear  along with running 36t pulleys instead of the old 20t pulley. the other thing i have to do to it is swap out the motor to a new one  which will be a 1521/1.5D or a 1527 for when i up the voltage lol

 

dragster speed project: fit a esc,motor, lipo's and tx/rx 

Edited by arogon1235
Link to comment
Share on other sites

Finish designing / making parts for Tuber crawler and then get it painted / built / muddy 

Build TL01 Scaler for my daughter

Get a touring or drift chassis sorted for a 1/10 New Bright Challenger body

Put some electrics in the Turnigy 2WD SCT I have had for ages and never driven

 

The problem is if I work on too many at once the missus realises how many there are....

 

 

 

  • Like 1
Link to comment
Share on other sites

Long range FPV aircraft, although not entirely legal frequencies may be used.

 

433mhz 1000mw for the radio, 900mhz 800mw for the fpv, ardupilot 2.5 ideally for the brains, maybe even customise the radio so its got a telemetry downlink through the radio, ideal range is 10 miles, ideal flight time will be 1hr

Link to comment
Share on other sites

Long range FPV aircraft, although not entirely legal frequencies may be used. 433mhz 1000mw for the radio, 900mhz 800mw for the fpv, ardupilot 2.5 ideally for the brains, maybe even customise the radio so its got a telemetry downlink through the radio, ideal range is 10 miles, ideal flight time will be 1hr

This sounds interesting you must upload some pictures of your finished project :)

Link to comment
Share on other sites

I'm working on a Yokomo dogfighter works 92 its in bits in a box awaiting parts from the US here's a pic of how it arrived

EF835CC2-BC9E-4EE2-BEA3-7C023A27D3CC_zps

The purple wasn't doing it for me so I've got new front and rear bulkheads on the way also new belts and a few other rare trick bits for it.

I've also got a 94 dogfighter on it's way to me aswell so I'll see what that needs when it lands :hahadance: :hahadance:

Link to comment
Share on other sites

Finish my Jeep Cherokee SCX10 project,then tweak the other Rubicon,winter project is a Vintage Roughrider rebuild as I,ve got all the parts bar the paint,then I really should solder in the ESC to my slash .

A lack of motivation is my biggest problem at present.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...