Headlight, foglight, brake, tail and reverse light...

[luke1983]

As above guys, I'm looking for a set that does all the above.  Not bothered about hazards or indicators as I think they are over kill.  

 

I've seen the tamiya TLU-01 & 02 combo which come in at

[jordan_bench10]

can get ones for 20 quid where you use a y splitter servo in one side leds the other for several channels normally reverse brake and lights full on accelerate

[RC4WD fan]

i have this on my pajero http://www.rcmart.com/4channel-profesional-lighting-system-p-37069.html?cPath=438_900 nice light kit

[cyclicscooby]

Hi Luke.

I to was after something similar, but ended up making/programming my own, as I don't think headlight that work via forward throttle is very scale.

I used an Arduino clone (A-star micro

[luke1983]

Sounds very good but how easy is the programming? I've seen a couple of ideas like this but couldn't make sense of the flipping software!

Luke

[heavyleftthumb]

i have used a scale light kit from local lhs. was around 14 quid. y leads from rx and got headlights, taillights, indicators, reverselights and main beam sort of function. it all depends how far you want to go. 

[luke1983]

There are loads out there by the looks of it just can't find one that does exactly what I'm after. I have two spare channels on my set up. The functions I am after are:

Headlights. On/off (poss dipped and main beam but NOT linked to throttle!) 4 x warm white LED. 3 way switch on Tx?

Foglights: On/off. 2 x warm white LED. Other switch on Tx?

Tail lights: Come on with headlights. 2 x red LED.

Brake lights: On when braking through ESC. 2 x red LED.

Reverse lights: On when reversing. 2 x warm white LED.

Luke