I need a toe link or buckle that's 75mm eye to eye. Traxxas bandit , rustler might work can anyone measure.

[RCbutcher]

I have an fg and the servo to saver links are 75mm, I'm missing one so I thought I would try to find a pair of links from a smaller scale to use.

This seems like the right section for this size links I think the traxxas alloy rustle toe links might be 75mm I'm not sure. If they are do they have a little room either way for adjustments should I need it.

Or any other rc with 75mm eye to eye m3 hollow balls I would like them to be anodized prefrebley but it's not a must.

[b19jas]

Just measured my stock Stampede 2wd VXL rear camber link and as it sits on the car its 80mm give or take eye to eye. Thats with 3 or 4 threads visible either end so would screw up a few more mm. The 2wd Pede ( cant comment on rusty and bandit ) also uses very long rod ends so there is plenty of scope to make it the desired length with minimal work. 

 

Hope that helps

Edited August 30, 2014 by b19jas

[RCbutcher]

Thanks mate. I think it needs to be 75mm with room either way.

Is that the sane for the front steering rods I've found some on ebay that say 75mm long but idk if that's eye to eye so wanted to ask before I buy some.

I might end up making some links from threaded bar and alloy tubing but would rather quick adjustable ones like the traxxas alloy links.