Jordan2010 Posted July 27, 2014 Share Posted July 27, 2014 Hi guys I'm in need of a new lead on my transponder could anybody help or know where are cheap to repair it plzzzz Quote Link to comment Share on other sites More sharing options...
cutting42 Posted July 29, 2014 Share Posted July 29, 2014 Hiya They are pretty tricky to repair and AMB (now MyLaps) will not repair them. I have seen a few home repairs but you need to be brave and strip away the casing and expose wires/solder tabs. This was on RCTech http://www.rctech.net/forum/electric-road/340679-amb-transponder-repair.html The wire on mine ripped at the end, so I cut open part of the case at the bottom. Using a knife carefully/ slowly remove most of the epoxy until you can reach the two solder tap. And just simply solder new wire and I use glue gun to cover the hole. Then use sticker / velcro to cover up. The other possibility is to trade it for a new Mylaps hybrid transponder but you are still looking at Quote Link to comment Share on other sites More sharing options...
cutting42 Posted August 1, 2014 Share Posted August 1, 2014 Did this help, some feedback would be nice Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.