stormin_norman Posted July 23, 2014 Share Posted July 23, 2014 Hi all, Can anyone recomend a decent tool set to invest in? I've managed to ruin most of my cheap hex tools so probably a good time to invest in a decent set. Thanks in advance for your recomendations. Paul Quote Link to comment Share on other sites More sharing options...
Nitroholic Posted July 23, 2014 Share Posted July 23, 2014 I bought a set of Arrowmax hex drivers a little while back, and I have been very pleased with them. Basically the same as EDS, but a bit cheaper. No problems with rounding off or snapping tips. I back that up with a 1/4 socket set with screwdriver bits, small sockets and some additional hex/torx bits. Does everything I need it to do. For a nitro, you will want 1.5, 2, 2.5 and 3mm hex drivers, plus a few small sockets. 5.5 - 8mm. On top of that, a couple of phillips head screwdrivers and a coupe of flat bladed ones. Quote Link to comment Share on other sites More sharing options...
stormin_norman Posted July 23, 2014 Author Share Posted July 23, 2014 Thanks for the feedback. Set of Arrowmax now ordered! Quote Link to comment Share on other sites More sharing options...
wwit Posted July 23, 2014 Share Posted July 23, 2014 I see you already ordered some, but another amazing must have set of drivers are made by MIP. Thorp Drivers are extra hard and will get out those pesky grub screws after they have rounded off all the other hex keys.http://miponline.com/cgi-bin/sc/ss_mb.cgi?storeid=*100a321d27069630eff7&ss_parm=A69d67f58594daddec60f163d35f4378c Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.