Hi all
So before starting the engine I decided to watch the DVD that came with it on how to get started. Then I went down and put it on a platform so the wheels dont touch the ground. I filled the tank to the top with a bottle then removed the air filter to check the throttle valve so its 1/4 open and put it back on. I then pressed the primer button several times. After I did that I pulled the pull starter several times using quick short pulls but no joy, it was also kind of hard to pull so I decided it could be a flooded engine or a glow plug issue so I took out the glow plug and tested it in the igniter and it glowed red hot, I could also see that filter has absorbed some fuel . I then discharged the fuel by following the procedure in the manual then set the high speed needle to its basic setting. After all that I screwed the glow plug back on and tried starting it but without luck. I also heated the engine with a hairdrier until its too hot to touch bit still no luck. So what am I doing wrong fellas?
Thanks