Jump to content
  • capri-boy
    capri-boy

    Hobbywing Max 10 ESC

    HOBBYWING EZRUN MAX10-SCT ESC SPEED CONTROLLER

     

    The MAX10 SCT ESC is applicable to various 1/10th scale vehicles like trucks, short-course trucks, monster trucks, and etc. Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. 

    With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adusting the ESC parameters as per his preference and ability.

    The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. 

    You can upgrade the MAX10 SCT with the HobbyWing USB LINK software, a multifunction LCD program box and a laptop. HobbyWing updates its ESC firmware regularly giving you upgraded features more often when available. 

     

    gallery1.jpg



    EzRun MAX10 SCT Features:

    • High Reliability & Durability
    • Great Flexibility & Versatility
    • Advanced and Secure Electronic Switch
    • Applicable to All Weather Conditions
    • Innovative Filter Capacitor Thermal Protection
    • Regular Firmware Updates Free of Charge

     

    Spec Check:

    • Scale: 1/10th
    • Brushed/Brushless:BL
    • Sensored/Sensorless: SL
    • Waterproof: Yes
    • Cont./Peak Current: 120A/760A
    • Input: 2-4S LiPo/6-12 Cells NiMH
    • BEC Output: Switch Mode:6V/7.4V,3A
    • Input Wires: Red-12AWG-200mm*1/Black-12AWG-200mm*1
    • Output Wires: Black-12AWG-200mm*3
    • Input Connectors: No
    • Output Connecotors: 4.0 Bullet Connectors (Female)
    • Fan Size: 25.0x25.0x10.0mm
    • Fan Voltage Range: 5-7.4V
    • WiFi Module: Supported
    • Program Port: FAN/Program Port
    • Size: 49.0x39.5x34.7mm
    • Weight: 105g

     

    Applications

    Motors

    SL BL Motors/SD BL Motors(only in SL mode)

    Vehicles

    1/10thSCTs/Truck/Monster Truck

    KV Rating/T Count

    2S LiPo:KV≤6000;3S LiPo:KV≤4000;4S LiPo:KV≤3000(36XX Series of Motors)

     

     

     

     

     

    gallery2.jpg

     

     

     

    • Part Number: HW30102601 -

     

     

    Source

     

     

     




    User Feedback

    Recommended Comments



    Sensored it says,.. this is the 1st Ezrun to be sensored?

     

    edit:// no just sensored motors running sensorless,. oh well.  times they aren't changing.

    Edited by Deafty

    Share this comment


    Link to comment
    Share on other sites

    Why would they make it sensored tho? The Xeruns have that covered......

    Share this comment


    Link to comment
    Share on other sites

    The way I read the specifications it says ...

     

    Brushed / brushless: BL

    Sensored / sensorless: SL

     

    It indicates normal options then clarifies - its brushless and its sensorless.

     

    Al.

    Share this comment


    Link to comment
    Share on other sites

    12 hours ago, Tug said:

    So will this replace the famous SC8? 

     

    Considering the price drops and 'dumping' of the SC8 i'd say that's highly likley.  If you compare the specs it's very similar the the SC8 - upto 4s and 120a/760a burst.

     

    I'd expect it to work just fine anywhere the SC8 did.

    Share this comment


    Link to comment
    Share on other sites

    Makes me laugh. Billed as a 1/10th esc and still better spec than the one in the HPI 1/8 Trophy series :lol:

    Shows how under par rtr electronics are :lol:

     

    Nice looking upgrade of the SC8 that can utilize a HV servo :thumbsup:

    Share this comment


    Link to comment
    Share on other sites

    But isn't the Xerun slowly disappearing? They don't seem as readily available as they once were, or is it just me? I just feel that Hobbywing is replacing their old line up with these new Max series. That's fine, all except the odd cell count issue. 

    Share this comment


    Link to comment
    Share on other sites

    They have just brought out the Xerun XR8 Plus and the XR10 pro, which are both highend sensored ESC's and there is also a XR10 SCT on the way.....

    Share this comment


    Link to comment
    Share on other sites

    2 hours ago, Tug said:

    But isn't the Xerun slowly disappearing? They don't seem as readily available as they once were, or is it just me? I just feel that Hobbywing is replacing their old line up with these new Max series. That's fine, all except the odd cell count issue. 

    And I don't know what the rest are like but my Max 8 only had LVC "low, medium, high" no voltages. Didn't like that.

    Share this comment


    Link to comment
    Share on other sites

    2 hours ago, dazp1976 said:

    And I don't know what the rest are like but my Max 8 only had LVC "low, medium, high" no voltages. Didn't like that.

    Yeah, I'm not keen on that system either, but it seems to work. 

    Share this comment


    Link to comment
    Share on other sites

    Oh these look nice. 

     

    7.4v Bec should work nice with today's power hungry servos 

     

    Wifi module ?  Is there an app out then for these Max seriers esc ? 

     

    Seems like a step in the right direction if you ask me even looks nicer than the old sc8 IMO 

     

    If I was in the market for a new 120a esc I'd deffiently be looking at one of these and I'd happily pay a little extra so I didn't have to run an external Bec to run high powered servos :good:

    Share this comment


    Link to comment
    Share on other sites

    The wire I circled in red monitors the motor temp on motors that except the plug so does that mean will be getting new motors to match this esc in a combo like the sc8  or are these motors already out ? 

     

    76B9CA18-5BA1-4D02-9453-53EE4D54CFD7_zps

    Share this comment


    Link to comment
    Share on other sites

    Got one of these in May from France for my Slash to replace a failed CC MMP, really happy with it so far, was going to get a SC8 but this was £5 more and newer so decided to give it a go, really good so far seems a lot better and tougher than the castle and WP. The extra capacitors are for use if the capacitors are constantly above 85C

     

    You can download the Android wifi express app directly from Hobbywing, you just have to manually install it, and just a bit buggy.

     

    IMG_20160520_180254_zpsefnrxj03.jpg

     

     

     

     

    Edited by Jforce

    Share this comment


    Link to comment
    Share on other sites

    3 hours ago, Jforce said:

    Got one of these in May from France for my Slash to replace a failed CC MMP, really happy with it so far, was going to get a SC8 but this was £5 more and newer so decided to give it a go, really good so far seems a lot better and tougher than the castle and WP. The extra capacitors are for use if the capacitors are constantly above 85C

     

    You can download the Android wifi express app directly from Hobbywing, you just have to manually install it, and just a bit buggy.

     

    IMG_20160520_180254_zpsefnrxj03.jpg

     

     

     

     

     

    Yours dosent have that wire I circled on it tho so did you unplug it or was it just not there ? 

    Share this comment


    Link to comment
    Share on other sites

    Wait is there a WiFi app thingy built in to all the MAX series? Or do you have to buy something separate? 

    Share this comment


    Link to comment
    Share on other sites

    You need one of these...

     

    20160725_122938_zpsxepgl7uc.jpg

     

    I done the latest firmware update on my XR8 at the weekend and I've now got data logging, it's only temps and voltage for now tho 

    Share this comment


    Link to comment
    Share on other sites

    It's the rpm speed ect ide like for logging. Then we can test motors against each other with ease. I want to see how much better castle motors are over hobbywing or Leppard or if at all. 

    Share this comment


    Link to comment
    Share on other sites

    19 hours ago, mydoddy69 said:

     

    Yours dosent have that wire I circled on it tho so did you unplug it or was it just not there ? 

     

    Checked and mine didn't come with that wire, the manual with it also does not show or mention the wire. 

    Share this comment


    Link to comment
    Share on other sites




    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    Loading...

  • Latest Articles

    By Tug, in Reviews,

    By Nick, in Interviews,

    By Nick, in Reviews,

    By Nick, in Reviews,

×
×
  • Create New...